Highlighted
dbolton
2 Iron

How to tell if EOP Xtream is active?

Jump to solution

Quick one...

What is the simplest way for the end-user to see if EOP Xtream is actually active/working?

Netstat?

Dan.

Tags (1)
0 Kudos
1 Solution

Accepted Solutions

RE: How to tell if EOP Xtream is active?

Jump to solution

To tell if EOP Xtream is active for the current connection you can run Netstat -abn from a command prompt on the remote VDI or RDS session. If EOP Xtream is active you will see 3 or more connections to the client computer, by default using port of 3389. The process name will be pndnasvc.exe.

6 Replies
vtscott1
1 Nickel

RE: How to tell if EOP Xtream is active?

Jump to solution

For a very quick check, I look at the IP address of the session connection on the client.  If it show a 127.x.x.x address then Xtream is active.

dbolton
2 Iron

RE: How to tell if EOP Xtream is active?

Jump to solution

I thought about this too but if the user is logging in externally over the SSL gateway, they get the 127.x.x.x address also.

Cheers,

Dan.

0 Kudos
pet11
1 Copper

RE: How to tell if EOP Xtream is active?

Jump to solution

As far as I know you get the 127.x.x.x all the time once the 7.x PNTools is installed.

I believe from what I'm told that the Xtreme listens on port 3389 regradless whether its enabled or not, it proxies to RDP on 3390.

How you do tell I'm not sure...

RE: How to tell if EOP Xtream is active?

Jump to solution

To tell if EOP Xtream is active for the current connection you can run Netstat -abn from a command prompt on the remote VDI or RDS session. If EOP Xtream is active you will see 3 or more connections to the client computer, by default using port of 3389. The process name will be pndnasvc.exe.

dbolton
2 Iron

RE: How to tell if EOP Xtream is active?

Jump to solution

I guess good old netstat it is then

It would be good as a future feature if you could see on a per user/connection basis if EOP Xtream was active in the management console.

Cheers,

Dan.

0 Kudos
ngringaus
1 Copper

RE: How to tell if EOP Xtream is active?

Jump to solution

Hello , i have the same isue , but i see more that 3 connection to 3389 and the processes   pndnasvc.exe

But i cant see the license in use (Experience optimization pack)i attach screen shot

I not sure is eop xtreme is in use, and i need it because i using wan connetions

i have check in client, in application and in computer group to enable eop

Thanks

Nicolas

mierda.png

0 Kudos