未解决
此帖子已超过 5 年
2 消息
0
1120
RecoverPoint Windows异构测试卷不可用问题
求助!
环境
1,存储Source:VNX5300 Target:CX4 120
2,RecoverPoint SE 4.1 保护LUN 300GB 日志卷50GB
3,操作系统:Source:WIN2008 R2 X64 Target:Win2003 Stand x32
4,数据卷格式:NTFS 基本卷
状态:
同步完成后,Target 用Test Copy 中的logged access选择last copy,确认完成后一切正常,提示Mount数据卷,在Target Win2003上挂载测试数据卷,显示未知初始化磁盘,无法挂载和使用,(但可以初始化并格式化)
问题:
(从原理上来说是可支持异构的,因为有使用Win2003挂载Win2008的格式化磁盘)1,在Recovepoint下是否支持Windows不同版本的异构灾备数据实现。
麻烦答疑!
yuanyue
2 消息
0
2015年7月13日 02:00
Jason
非常感谢!
发件人: Jason周
收件人: yuanyue
日期: 2015-07-13 17:17
主题: Re: - RecoverPoint Windows异构测试卷不可用问题
ECN
RecoverPoint Windows异构测试卷不可用问题
reply from Jason周 in 存储系统 - View the full discussion
楼主,你好。我是论坛版主Jason周。我注意到,你的这个帖子被不小心创建在了你
的个人的版面内了。建在个人版块里的帖子其他人基本没机会看到,所以至今都没有
人来回复 。至于为什么会发生这样的情况以及如何避免,可参考我写的这个帖子 【
帮助说明】如何避免帖子在不经意间被创建在了错误的版面里,导致收不到回复(因
为别人看不到帖子)
我现在已把你的帖子移动到中文支持论坛内的 存储系统 版块里了,这样更多的朋友
能够看到,相信稍后会有懂RecoverPoint的朋友们来跟你分享或解答。以后建议先由
中文支持论坛首页 用顶部的导航按钮先进入相应的版块(例如:存储系统),然后
用右边操作栏里的“开始一个讨论”来创建帖子提问或者分享,这样创建出来的帖子
默认就是在你所在的版块的,避免帖子被无意中创建在了个人版块内。
谢谢!
Reply to this message by replying to this email, or go to the message on
ECN
Start a new discussion in 存储系统 by email or at ECN
Following RecoverPoint Windows异构测试卷不可用问题 in these streams: Inbox
Jason_Zhou
1.2K 消息
0
2015年7月13日 02:00
楼主,你好。我是论坛版主Jason周。我注意到,你的这个帖子被不小心创建在了你的个人的版面内了。建在个人版块里的帖子其他人基本没机会看到,所以至今都没有人来回复 。至于为什么会发生这样的情况以及如何避免,可参考我写的这个帖子 【帮助说明】如何避免帖子在不经意间被创建在了错误的版面里,导致收不到回复(因为别人看不到帖子)
我现在已把你的帖子移动到中文支持论坛内的 存储系统 版块里了,这样更多的朋友能够看到,相信稍后会有懂RecoverPoint的朋友们来跟你分享或解答。以后建议先由中文支持论坛首页 用顶部的导航按钮先进入相应的版块(例如:存储系统),然后用右边操作栏里的“开始一个讨论”来创建帖子提问或者分享,这样创建出来的帖子默认就是在你所在的版块的,避免帖子被无意中创建在了个人版块内。
谢谢!
Roger_Wu
4K 消息
0
2015年7月13日 20:00
看看这条KB能否解决你的问题:RecoverPoint: Unable to mount LUN on remote site.
https://support.emc.com/kb/49196
Resolution
Workaround :
There are two ways to workaround this problem.
Workaround 1:
1.Enable Image Access using the RPA Console.
2.Scan for LUN with kutil or mount with kutil and you will get an error
For detailed instructions, reference the EMC RecoverPoint Administrator™s Guide. This document is available on Powerlink. Navigate to Support > Technical Documentation and Advisories > Software ~ P-R ~ Documentation > RecoverPoint > Maintenance/Administration.
Within the document, go to Testing, Failover, and Migrating > Accessing a replica > Enabling image access.
3.Remove Image Access using the RPA Console
4.Using Disk Management, right-click the device and select Initialize > Format the LUN.
5.Enable Image Access using the RPA Console
6.Mount the LUN using kutils.
Workaround 2:
1.Enable image access using the RPA Console. Reference step one above for details on how to do this.
2.Reboot the remote host.
Permanent Fix :
Install Microsoft hot fix using Microsoft Article ID 916048 "You experience problems when you use the Microsoft Storport storage driver for host bus adapter removable storage on a computer that is running Windows Server 2003" or upgrade to Microsoft Windows 2003 Service Pack 2.