Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "备份和恢复系统" which would be the most relevant for this question.
christopher_ime
2K 消息
0
2013年7月31日 19:00
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "备份和恢复系统" which would be the most relevant for this question.
Jason_Zhou
1.2K 消息
0
2013年7月31日 23:00
Hi yikai, 我帮你把这个帖子移动至 备份和恢复系统 版块内了,这样更多懂行的朋友们能看见并帮你解答这个Avamar相关的问题。
另外,关于帖子创建的位置,建议看下我以前写的这个帮助文档 【帮助说明】如何避免帖子在不经意间被创建在了错误的版面里,导致收不到回复(因为别人看不到帖子)
o17Uu33DCF12520
1.1K 消息
1
2013年8月1日 01:00
在Avamar里面配置网络,通常有两种方法。
第一用dpnnetutil命令,注意只有当你是配置multinode的时候,他会提示你:
Please enter the network gateway address for SERVER. You may modify this later for individual nodes.
这样你可以一次性把所有node都配好,但是这招在single node上是不会有提示的,所以只是变成了默认网关。
那么在single node上,就需要用到这个命令:
/usr/sbin/netconfig --ip=STATIC-IP-ADDR --netmask=NETMASK --hostname=HOSTNAME --domain=DOMAIN --device=eth0 --gateway=GATEWAY
其实就是修改/etc/sysconfig/network:
NETWORKING=yes
HOSTNAME=avamar-1.example.com
GATEWAY=10.0.254.1
改完了记得:service network restart
TimQuan
1.2K 消息
0
2013年8月1日 01:00
楼主,配Avamar路由表需要找professional support来专门做的。建议你联系下EMC professional support部门。
Jeffey1
2.8K 消息
0
2013年8月1日 01:00
EMC 中国售前咨询热线: 400-650-6006
工作时间:周一至周五 9:00-18:00