Skip to main content
      • Place orders quickly and easily
      • View orders and track your shipping status
      • Enjoy members-only rewards and discounts
      • Create and access a list of your products

      Tripp Lite SmartPro 500VA 300W 120V Line-Interactive UPS - 6 NEMA 5-15R Outlets, USB, DB9, Network Card Option, 1U Ra...

      CAD $354.99
      Add to Cart
      Manufacturer part SMART500RT1U | Dell part A7072640 | Order Code a7072640 | TrippLite
      Compare

      SMART500RT1U SmartPro® Line-Interactive Rack/Tower UPS with Network Slot

      POWER PROTECTION AND BATTERY BACKUP
      for servers and network hardware

      This line-interactive UPS system protects your critical network systems from damage, downtime and data loss.
      • Battery backup powers critical systems during outages.
      • AVR corrects power sags (brownouts).
      • Surge protection blocks harmful transient voltages.
      • LED indicators signal power, voltage correction, load level and battery charge state.
      • Network card slot supports optional remote access and network management.
      • USB and serial ports connect to computers for power management.
      • 3-year warranty and $250,000 insurance reflect commitment to reliability.
      SMART500RT1U SmartPro® Line-Interactive Rack/Tower UPS with Network Slot
      Why is this UPS a Good Investment?

      Why is this UPS a Good Investment?

      The success of any organization depends on critical information systems like servers and network hardware. If your critical systems don't have reliable power, employees can't work, communications go down, automated systems malfunction and productivity grinds to a halt. It would be nice if utility power was always reliable, but it isn't. Between severe weather, the aging electrical grid and unavoidable hazards lurking inside your own walls, your servers and network hardware are under constant attack from power problems. Even a brief loss of power or a momentary surge can damage your equipment, corrupt your data, bring down your network and hurt your bottom line.

      The potential costs of downtime are alarming. Surveyed averages range from $1,167 per minute for mid-size businesses (IDC) to $7,908 per minute for larger operations (Ponemon Institute). For a tiny fraction of these costs, you can prevent damage, downtime and data loss by installing this SmartPro® UPS system. It conditions incoming AC power to protect your equipment, provides enough battery backup to outlast most outages and allows critical systems to shut down gracefully to prevent data loss and corruption during extended blackouts.

      Common Applications

      Protect Servers and Network Hardware
      Application Servers, Storage Servers, Database Servers, File Servers, Virtualization Servers, Proxy Servers, Web Servers, Media Servers, VoIP Servers, Network-Attached Storage, Network Switches, PoE Switches, Firewalls, Network Appliances, Bridges, Gateways, Routers

      Reliable Battery Backup

      • Half-Load Runtime: This UPS system will support a 50% load (150 W) for up to 14.6 minutes.
      • Hot-Swappable Batteries: The internal batteries can be replaced without turning off the UPS system and disrupting the operation of connected equipment.

      AVR and Surge/Noise Protection

      In locations with chronic voltage problems, frequent switching to battery drains reserve power and shortens battery life. This UPS system has a feature called automatic voltage regulation (AVR) that solves the problem. The UPS detects when input voltage is out of bounds and corrects it without using the battery.

      All Tripp Lite UPS systems also include built-in surge protection and noise filtering to shield your equipment from destructive transient voltages and electromagnetic (EMI/RFI) line noise.

      Flexible Management Options

      There are several ways to manage this UPS system:
      1. Use the front-panel LEDs for convenient local management.
      2. Use the USB port with your computer's built-in power management features.
      3. Use the USB or serial port with your computer and Tripp Lite's PowerAlert® software. PowerAlert provides enhanced features like automatic file saves, event notification, logging, advanced device control and an SNMP agent that supports centralized management. Select UPS models include a convenient CD-ROM, or you can download the latest version of PowerAlert for free at Tripp Lite's website.
      4. Install an optional network card to enable standalone network management via SNMP, Web, SSH or telnet. The network card has an Ethernet port and embedded interface, allowing you to access advanced monitoring, control and notification features without directly connecting the UPS system to a computer. The network card also supports connecting one or more optional sensors for remote temperature, humidity and contact closure monitoring. (Available network cards and sensors include TLNETCARD with TLNETEM sensor; WEBCARDLX with E2MT, E2MTDO, E2MTDI and E2MTHDI sensors; and SNMPWEBCARD with ENVIROSENSE sensor. Refer to each model for specific features.)
      This UPS system also has one switched outlet bank, allowing you to reboot a locked connected device remotely or turn off nonessential loads during extended outages to provide additional runtime.

      LED Control Panel

      The intuitive multicolor LEDs display a variety of helpful and important information, including power status, voltage regulation status, connected load level, battery charge level and battery condition.

      Eco-Friendly Design

      • High Efficiency: This UPS system saves energy, produces less heat, shrinks your carbon footprint and reduces annual operating costs.
      • User-Replaceable Battery: This UPS system has a user-replaceable, recyclable battery, allowing it to remain in service instead of going to a landfill.
      • RoHS Compliance: This UPS system complies with the RoHS (Restriction of Hazardous Substances) Directive, limiting the use of hazardous substances in manufacturing.

      Dependable Service from an Industry Leader

      Service and Support
      • 3-Year Product Warranty: If this UPS system (including the internal battery) proves defective in material or workmanship within that period, Tripp Lite will repair or replace it at no charge.
      • $250,000 Insurance: Tripp Lite will repair or replace connected equipment damaged by surges – even lightning strikes!
      • Free Tech Support: Chicago-based, in-house tech specialists are available by phone, email and chat.
      Industry Leader
      • Over 90 Years: Founded in 1922, Tripp Lite has a long-established and proven track record of providing reliable products and responsive customer service.
      • Trusted Name: From the smallest office to the largest data center, customers worldwide trust Tripp Lite to power, protect, manage and connect valuable IT equipment.
      • Third-Party Safety Testing and ISO 9001 Certification

      Key Specifications

      Model: SMART500RT1U
      Load Capacity:
      500 VA (300 W)
      Nominal AC Input: 120V, 60 Hz
      Nominal AC Output: 120V, 60 Hz
      AC Outlets: 7 x 5-15R
      Switched Outlet Banks: One switchable single-outlet 5-15R load bank
      Output Waveform (AC Mode): Sine Wave
      Output Waveform (Battery Mode): PWM Sine Wave
      Input Cord: 10 ft. (3 m) Cord with 5-15P Plug
      Half-Load Runtime: 14.6 min. (150 W Load)
      Communications:
      USB Port (HID-Compliant); Serial Port (DB9); Network Card Slot; EPO
      User-Replaceable Battery: Yes (RBC62-1U)
      Primary Form Factor: 1U Rack (Supports 2- or 4-post rack installation with included kit.)
      Dimensions: 1.75 x 17.5 x 11.3 in. (4.5 x 44.5 x 28.7 cm)
      Weight: 17.6 lb. (8 kg)
      Standards: UL 1778 (USA); CSA (Canada); NOM (Mexico); FCC (EMI); RoHS
      Product Warranty (Worldwide): 3-Year Limited Warranty (Registration required for third year.)
      Connected Equipment Insurance (U.S., Canada and Puerto Rico): $250,000
      What's Included: UPS, 2- or 4-Post Rack Installation Kit, USB/Serial/EPO Cabling, PowerAlert Software, Manual

      Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Actual products may differ slightly from photos. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. Runtime varies with load, battery condition and other factors. Go to Tripp Lite's website for more information, including complete warranty terms and conditions.

      The SmartPro line-interactive SMART500RT1U UPS system with AVR protection provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable electronics or destroy data. The 120V battery backup is ideal protection for point-of-sale and kiosk applications, a small business VoIP network, or rack-mount equipment in your server room or network closet.

      Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes.

      Six 5-15R outlets provide battery backup, 567 joules of network-grade surge protection and voltage regulation for your crucial components. Five outlets are UPS-supported, and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable, allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment.

      AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART500RT1U maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure. The fast-to-recharge internal batteries are field-replaceable and hot-swappable.

      An accessory slot accommodates the optional Java-free HTML5-based WEBCARDLX interface (sold separately), which enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime.

      This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

      A 97% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs.

      Five front-panel LEDs keep you apprised of line power, battery power, overload, voltage regulation and battery low/replace status at a glance. A multi-function alarm sounds to warn you of power failure, overload and low-battery conditions.

      RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite's free downloadable PowerAlert software to enable safe unattended shutdown in case of a prolonged power failure. The EPO port supports emergency shutdown in large facilities. Cables are included.

      Hardware is included for mounting the UPS in 1U of space in an EIA-standard 19-inch 2-port or 4-post rack or in an upright tower position. The 10-foot power cord with NEMA 5-15P plug connects to any compatible AC outlet.

      Tech Specs


      General
      Device Type
      UPS - rack-mountable
      Height (Rack Units)
      1U
      Rack Size
      19"

      Power Device
      UPS Technology
      Line interactive
      Input Voltage
      AC 120 V
      Frequency Provided
      50/60 Hz
      Input Wiring
      1-phase
      Frequency Required
      50/60 Hz
      Input Connectors
      1 x power NEMA 5-15P
      Power Output Connectors Details
      6 x power NEMA 5-15R
      Output Voltage
      AC 120 V 50/60 Hz
      Power Capacity
      300 Watt / 500 VA
      Output Waveform
      Sinewave
      Surge Suppression
      Yes
      Surge Response Time
      4 ms
      Surge Energy Rating
      567 Joules
      Circuit Protection
      Circuit breaker

      Battery
      Run Time (Up To)
      At full load
      Recharge Time
      12 hours

      Expansion / Connectivity
      Interfaces
      • 1 x management (RS-232) - 9 pin D-Sub (DB-9)
      • 1 x USB - 4 pin USB Type B
      Expansion Slots
      1 (total) / 1 (free) x Expansion Slot

      Miscellaneous
      Cables Included
      • USB cable
      • RS232 cable
      • EPO cable
      • Power cable 3.1 m
      Rack Mounting Kit
      Included
      Equipment Protection Value
      250000 US Dollars
      Compliant Standards
      FCC Class A certified, NOM, ICES Class A, ICES-003:2016, CAN/CSA C22.2 No. 107.3-14, UL 1778 5th edition R10.17

      Software / System Requirements
      Software Included
      TrippLite PowerAlert

      Manufacturer Warranty
      Service & Support
      Limited warranty - 3 years

      Environmental Parameters
      Min Operating Temperature
      0 °C
      Max Operating Temperature
      40 °C
      Min Storage Temperature
      -15 °C
      Max Storage Temperature
      50 °C
      Humidity Range Operating
      0 - 95% (non-condensing)
      Sound Emission
      45 dBA

      Dimensions & Weight
      Width
      43.99 cm
      Depth
      28.6 cm
      Height
      4.39 cm
      Weight
      7.18 kg

      Dimensions & Weight (Shipping)
      Shipping Width
      39.88 cm
      Shipping Depth
      54.1 cm
      Shipping Height
      10.67 cm
      Shipping Weight
      8.07 kg


      Compare Products ()

      Add the products you would like to compare, and quickly determine which is best for your needs.

      Add the products you would like to compare, and quickly determine which is best for your needs.
      Top