APC NetShelter Rack PDU Advanced - Power distribution unit (rack-mountable) - metered outlet - AC 200-240 V - 17.3 kW - 17300 VA - 6 ft cord - black

Name: APC NetShelter Rack PDU Advanced - Power distribution unit (rack-mountable) - metered outlet - AC 200-240 V - 17.3 kW - 17300 VA - 6 ft cord - black
Brand: APC
SKU: ac021025

$3,875.00

Temporarily Out of Stock

Financing Offers Learn More

Manufacturer part APDU10452MO | Dell part AC021025 | Order Code ac021025 | American Power Conversion

Compare Compare

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Outlet and PDU level power metering for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing.

Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy.

1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected.

Tech Specs

General

Device Type

Power distribution unit - rack-mountable

Height (Rack Units)

Cord Length

6 ft

Color

Black

Power Device

Input Voltage

AC 200-240 V

Input Wiring

3-phase

Frequency Required

50/60 Hz

Input Connectors

1 x power IEC 60309 460P9

Power Output Connectors Details

21 x power IEC 60320 C13/C15
21 x power IEC 60320 C13/C15/C19/C21

Output Voltage

AC 208 V

Max Electric Current

60 A

Power Capacity

17.3 kW / 17300 VA

Networking

Remote Management Interface

Ethernet 10/100/1000

Remote Management Protocol

SNMP

Expansion / Connectivity

Interfaces

Management (Gigabit Ethernet) - RJ-45
Cascading - RJ-45

Miscellaneous

Cables Included

Power cable 6 ft

Features

Vertical orientation, LCD display, overload protection

Compliant Standards

EN 62368-1, UL 62368-1, UKCA, FCC Part 15 Subpart B, CSA C22.2 No. 62368-1

Manufacturer Warranty

Service & Support

Limited warranty - replace or repair - 3 years

Environmental Parameters

Min Operating Temperature

23 °F

Max Operating Temperature

140 °F

Humidity Range Operating

5 - 95%

Dimensions & Weight

Width

2.2 in

Depth

3 in

Height

70.1 in

Weight

24.47 lbs

Dimensions & Weight (Shipping)

Shipping Width

10.3 in

Shipping Depth

5.2 in

Shipping Height

78 in

Shipping Weight

31.08 lbs

Add the products you would like to compare, and quickly determine which is best for your needs.

Compare Products

Top

Welcome

Welcome to Dell

APC NetShelter Rack PDU Advanced - Power distribution unit (rack-mountable) - metered outlet - AC 200-240 V - 17.3 kW - 17300 VA - 6 ft cord - black

Tech Specs