APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. PDU level power metering via remote access and local display for power visibil... Show More
APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparalleled deployment flexibility. Maximum outlet density with 48 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.
Outlets: (24) C13/C15/C19/C21, (24) C13/C15
Interactive LCD display
3-year APC warranty
Input: 3PH, 530P6
Full-featured network management capability
Active power measurements (volts, amps, kW, kWh)
Shop Similar Products
Tech Specs
Technical Information
PDU Type
Switched
Phase
Three Phase
Plug/Connector Type
IEC 60309 30A 3P+N+PE
Receptacle Type
IEC 60320 C13/C15
IEC 60320 C13/C15/C19/C21
Receptacle Detail
24 x IEC 60320 C13/C15
24 x IEC 60320 C13/C15/C19/C21
Power Description
Input Voltage
415 V
480 V
Input Voltage Range
200 V AC - 240 V AC
346 V AC - 415 V AC
Output Voltage
240 V AC
Power Rating (VA)
17.30 kVA
Power Rating (Watt)
17.30 kW
Input Current
30 A
Interfaces/Ports
Network (RJ-45)
Yes
Physical Characteristics
Color Family
Black
Product Color
Black
Form Factor
Rack
Rack Height
0U
Cord Length
5.91 ft
Height
70.1"
Width
2.2"
Depth
3"
Weight (Approximate)
21.16 lb
Miscellaneous
Certifications & Standards
UKCA|TAA compliance
Green Premium
Yes
REACH free of SVHC
Yes
WEEE Statement
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Country of Origin
India
Environmentally Friendly
Yes
Environmental Compliance
Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty
3 Year
Additional Warranty Information
3 years repair or replace
Compare Products ()
Add the products you would like to compare, and quickly determine which is best for your needs.
Add the products you would like to compare, and quickly determine which is best for your needs.