Availability Automatic internal bypass:
- Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime:- Allows additional run time to be quickly added as needed.
Intelligent battery management:- Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries:- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown:- Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging:- Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageability
Network manageable:
- Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible:- Enables centralized management via the APC InfraStruXure Manager.
SmartSlot:
- Customize UPS capabilities with management cards.
LED status indicators:
- Quickly understand unit and power status with visual indicators.
Serial connectivity:- Provides management of the UPS via a serial port.
Adaptability
Plug-and-Play external batteries:
- Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible:- Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware:- Install maintenance releases of firmware remotely using FTP.
Serviceability
User-replaceable batteries:
- Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test:- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification:- Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification:- Warns when a battery is not available to provide backup power.
Audible alarms:- Provides notification of changing utility power and UPS power conditions
Protection
Frequency and voltage regulation:
- Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning:- Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction:- Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible:- Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable:- Provides temporary battery power when the utility power is out.
Resettable circuit breaker:- Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved:- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.