$1,249.00
Temporarily Out of Stock
Manufacturer part PR2200RT2U | Dell part AA888713 | Order Code aa888713 | CyberPower Systems
.png)
Workstations
Ensure seamless power to workstations and make certain you have time to safely shut down systems during a longer outage.
Telecom/VoIP
Keep your communication lines open and running during power outages.
Corporate & Department Servers
Protect mission-critical IT equipment and data centers from potential data loss and costly business interruptions.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
How long will the UPS power my systems after the power goes out?
This system is estimated to run for 11.8 minutes at half load, 3.2 minutes for a full load. The LCD screen provides an estimated run time based on the required power usage during blackouts.
Can the battery capacity be expanded?
No, the PR2200RT2U does not support an extended battery module.
Can this unit run a sump pump, laser printer, or other larger office equipment?
We do not recommend using the PR2200RT2U to power sump pumps, laser printers, paper shredders, copiers, space heaters or other large electrical devices. The power demands of these devices may overload the unit, cause damage, and void the warranty.
Can the PR2200RT2U be monitored?
Yes, the PR2200RT2U comes with a free download of PowerPanel Business that provides a user-friendly dashboard interface for controlling and monitoring the UPS.
How do I mute the alarms?
The audible alarm can be set to Mute on Battery. This is accomplished by going to the basic set up via the LCD Screen, navigate to audible alarm and then set to Mute on Battery.
.jpg)
.jpg)
The PR2200RT2U is a Smart App Sinewave rack/tower convertible UPS with line-interactive topology, surge protection, and battery backup. CyberPower's Smart App Sinewave series creates a sine wave output devoid of power gaps which could cause unexpected shutdowns of sensitive equipment.
The Smart App Sinewave PR2200RT2U improves battery life through battery equalization technology and Automatic Voltage Regulation (AVR), which corrects minor power fluctuations without switching to battery power. The enhanced chassis design with an easy-to-access toolless front panel, captive screws for battery panel access, and color-coded rear panel make battery changes and installations simple and fast. The PR2200RT2U also has an innovative LCD panel that rotates 90°, tilts for a better viewing angle, and provides information on 47 different settings including UPS stats, UPS setup and control management, and testing options.
This model accepts the RMCARD205 network management card for remote management and control via a standard web browser or network management system.
Tech Specs
General
Device Type
UPS - active Power Factor Correction (PFC) - rack-mountable / externalHeight (Rack Units)
2UColor
BlackPower Device
UPS Technology
Line interactiveInput Voltage
AC 100/110/120/125 VInput Voltage Range
AC 75 - 149 VInput Voltage Range (Adjustable)
AC 70 - 155 VFrequency Provided
50/60 Hz ± 1%Frequency Required
47 - 63 HzInput Connectors
1 x power NEMA L5-30PPower Output Connectors Details
8 x power NEMA 5-20ROutput Voltage
AC 100/110/120/125 V + 5% / - 5% - 50/60 HzPower Capacity
2200 Watt / 2200 VADataline Surge Protection
Network - RJ-45 - 1 input line / 1 output lineOutput Waveform
SinewaveSurge Suppression
YesSurge Energy Rating
2430 JoulesCircuit Protection
Circuit breakerPower Factor (PF)
1.0Battery
Quantity
4Technology
Lead acidVoltage Provided
12 VCapacity
9 AhRun Time (Up To)
- 3.2 min at full load
- 11.8 min at half load
Recharge Time
3 hoursSwitchover Time
4 msFeatures
Maintenance free, sealed, hot-swappableNetworking
Remote Management Interface
USB, serialExpansion / Connectivity
Interfaces
- 1 x serial
- 1 x management (USB) - 4 pin USB Type B
- 1 x EPO (emergency power off)
- 1 x dry contact
- 1 x sensor
Expansion Slots
1 (total) / 1 (free) x expansion slotMiscellaneous
Included Accessories
Screws, 4 rubber feet, rack mounting brackets, 4 M5 cage nuts, 8 plastic washers, 12 screw hole dust covers, faceplate, 2-post rack mounting kit, 4-post rail rack mounting kit, tower baseplateCables Included
- Power cable 10 ft
- USB cable - external
- Serial cable - external
- Emergency power off cable - external
Rack Mounting Kit
IncludedEquipment Protection Value
400000 US DollarsFeatures
Audible alarm, emergency power off, overheat protection, Automatic Voltage Regulation (AVR), LED indicators, overcharge protection, overload protection, twist lock plug, hot-swappable batteries, reset breaker, buck operation, booster technology, rotatable LCD panel, GreenPower UPS Bypass Technology, Fast Charge technology, Human Interface Device (HID) support, Battery Equalization Technology, internal current limiting, low battery alarm, overload alarm, overcharge alarm, overheat alarmCompliant Standards
FCC Class A certified, UL 1778, RoHS, VCCI Class A, NMB-3 Class A, CAN ICES-3 Class A, cUL 107.1Software / System Requirements
Software Included
PowerPanel Business EditionEnvironmental Standards
ENERGY STAR
YesManufacturer Warranty
Service & Support
Limited warranty - 3 yearsEnvironmental Parameters
Min Operating Temperature
32 °FMax Operating Temperature
104 °FHumidity Range Operating
0 - 95% (non-condensing)Sound Emission
52.5 dBADimensions & Weight
Width
17.1 inDepth
16.2 inHeight
3.4 inWeight
59.79 lbsDimensions & Weight (Shipping)
Shipping Width
22.1 inShipping Depth
20.9 inShipping Height
10.8 inShipping Weight
67.7 lbs