Tripp Lite 5000VA- 3U -including internal batteries- rack/tower mount. SmartPro Intelligent Line-Interactive sine-wave U

Name: Tripp Lite 5000VA- 3U -including internal batteries- rack/tower mount. SmartPro Intelligent Line-Interactive sine-wave U
Brand: Tripplite
SKU: a7661619
Rating: 3 (2 reviews)

3 (2) Ask a Question

$3,791.80

Financing Offers Learn More

Add to Cart

Manufacturer part SMART5000TEL3U | Dell part A7661619 | Order Code a7661619 | TrippLite

Compare Compare

SMART5000TEL3U SmartPro® Line-Interactive Rack/Tower Sine Wave UPS with Network Slot

POWER PROTECTION AND BATTERY BACKUP
for servers and network hardware

This line-interactive UPS system protects your critical network systems from damage, downtime and data loss.

Pure sine wave output improves compatibility with sensitive equipment.
Battery backup powers critical systems during outages.
Advanced AVR corrects power sags (brownouts) and overvoltages.
Surge protection blocks harmful transient voltages.
LED indicators signal power, voltage correction, load level and battery charge state.
Network card slot supports optional remote access and network management.
USB and serial ports connect to computers for power management.
3-year warranty and $250,000 insurance reflect commitment to reliability.

SMART5000TEL3U SmartPro® Line-Interactive Rack/Tower Sine Wave UPS with Network Slot

Media

slide {0} of {1}, zoom in, SMART5000TEL3U SmartPro® Line-Interactive Rack/Tower Sine Wave UPS with Network Slot

4:06

Why is this UPS a Good Investment?

The success of any organization depends on critical information systems like servers and network hardware. If your critical systems don't have reliable power, employees can't work, communications go down, automated systems malfunction and productivity grinds to a halt. It would be nice if utility power was always reliable, but it isn't. Between severe weather, the aging electrical grid and unavoidable hazards lurking inside your own walls, your servers and network hardware are under constant attack from power problems. Even a brief loss of power or a momentary surge can damage your equipment, corrupt your data, bring down your network and hurt your bottom line.

The potential costs of downtime are alarming. Surveyed averages range from $1,167 per minute for mid-size businesses (IDC) to $7,908 per minute for larger operations (Ponemon Institute). For a tiny fraction of these costs, you can prevent damage, downtime and data loss by installing this SmartPro® UPS system. It conditions incoming AC power to protect your equipment, provides enough battery backup to outlast most outages and allows critical systems to shut down gracefully to prevent data loss and corruption during extended blackouts.

Common Applications

Protect Servers and Network Hardware
Application Servers, Storage Servers, Database Servers, File Servers, Virtualization Servers, Proxy Servers, Web Servers, Media Servers, VoIP Servers, Network-Attached Storage, Network Switches, PoE Switches, Firewalls, Network Appliances, Bridges, Gateways, Routers

Protect Equipment with Active PFC Power Supplies
Active PFC power supplies found in many devices require pure sine wave power.

Pure Sine Wave Output

When operating from battery power, a UPS system generates the waveform of its AC output. Many UPS systems generate PWM sine wave power, an approximation of the pure sine wave power you receive from your electrical utility. Although PWM sine wave power is compatible with most equipment, pure sine wave power is required by some devices -- such as computers with active PFC power supplies -- and prevents others from overheating, malfunctioning or failing prematurely. This UPS system generates pure sine wave power for superior compatibility with active PFC power supplies and other sensitive equipment.

Reliable Battery Backup

Half-Load Runtime: This UPS system will support a 50% load (1875 W) for up to 20 minutes.
Hot-Swappable Batteries: The internal batteries can be replaced without turning off the UPS system and disrupting the operation of connected equipment.

Advanced AVR and Surge/Noise Protection

In locations with chronic voltage problems, frequent switching to battery drains reserve power and shortens battery life. This UPS system has a feature called automatic voltage regulation (AVR) that solves the problem. The UPS detects when input voltage is out of bounds and corrects it without using the battery.

All Tripp Lite UPS systems also include built-in surge protection and noise filtering to shield your equipment from destructive transient voltages and electromagnetic (EMI/RFI) line noise.

Flexible Management Options

There are several ways to manage this UPS system:

Use the front-panel LEDs for convenient local management.
Use the USB port with your computer's built-in power management features.
Use the USB or serial port with your computer and Tripp Lite's PowerAlert^® software. PowerAlert provides enhanced features like automatic file saves, event notification, logging, advanced device control and an SNMP agent that supports centralized management. Select UPS models include a convenient CD-ROM, or you can download the latest version of PowerAlert for free at Tripp Lite's website.
Install an optional network card to enable standalone network management via SNMP, Web, SSH or telnet. The network card has an Ethernet port and embedded interface, allowing you to access advanced monitoring, control and notification features without directly connecting the UPS system to a computer. The network card also supports connecting one or more optional sensors for remote temperature, humidity and contact closure monitoring. (Available network cards and sensors include TLNETCARD with TLNETEM sensor; WEBCARDLX with E2MT, E2MTDO, E2MTDI and E2MTHDI sensors; and SNMPWEBCARD with ENVIROSENSE sensor. Refer to each model for specific features.)

LED Control Panel

The intuitive multicolor LEDs display a variety of helpful and important information, including power status, voltage regulation status, connected load level, battery charge level and battery condition.

Eco-Friendly Design

High Efficiency: This UPS system saves energy, produces less heat, shrinks your carbon footprint and reduces annual operating costs.
User-Replaceable Battery: This UPS system has a user-replaceable, recyclable battery, allowing it to remain in service instead of going to a landfill.
RoHS Compliance: This UPS system complies with the RoHS (Restriction of Hazardous Substances) Directive, limiting the use of hazardous substances in manufacturing.

Dependable Service from an Industry Leader

Service and Support

3-Year Product Warranty: If this UPS system (including the internal battery) proves defective in material or workmanship within that period, Tripp Lite will repair or replace it at no charge.
$250,000 Insurance: Tripp Lite will repair or replace connected equipment damaged by surges – even lightning strikes!
Free Tech Support: Chicago-based, in-house tech specialists are available by phone, email and chat.

Industry Leader

Over 90 Years: Founded in 1922, Tripp Lite has a long-established and proven track record of providing reliable products and responsive customer service.
Trusted Name: From the smallest office to the largest data center, customers worldwide trust Tripp Lite to power, protect, manage and connect valuable IT equipment.
Third-Party Safety Testing and ISO 9001 Certification

Key Specifications

Model: SMART5000TEL3U
Load Capacity: 5 kVA (3.75 kW)
Power Factor: 0.75
Nominal AC Input: 208V
Nominal AC Output: 120V (limited to 450W), 208V, 60 Hz
AC Outlets: 2 x 5-15R, 2 x L6-20R, 1 x L6-30R
Output Waveform (AC Mode): Pure Sine Wave
Output Waveform (Battery Mode): Pure Sine Wave
Input Cord: 10 ft. (3 m) Cord with L6-30P Plug
Half-Load Runtime: 20 min. (1875 W Load)
Communications: USB Port (HID-Compliant); Serial Port (DB9); Network Card Slot; EPO
User-Replaceable Battery: Yes (RBC94-3U)
Primary Form Factor: 3U Rack (Supports 4-post rack installation with included kit. Add 2POSTRMKITHD for 2-post rackmount installation. Add 2-9USTAND for tower installation.)
Dimensions: 5.25 x 17.5 x 25 in. (13.4 x 44.5 x 63.5 cm)
Weight: 143.3 lb. (65 kg)
Standards: UL 1778 (USA); CSA (Canada); NOM (Mexico); FCC (EMI); RoHS
Product Warranty (Worldwide): 3-Year Limited Warranty (Registration required for third year.)
Connected Equipment Insurance (U.S., Canada and Puerto Rico): $250,000
What's Included: UPS, 4-Post Rack Installation Kit, USB/Serial/EPO Cabling, PowerAlert Software, Manual

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Actual products may differ slightly from photos. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. Runtime varies with load, battery condition and other factors. Go to Tripp Lite's website for more information, including complete warranty terms and conditions.

Documents

The SMART5000TEL3U SmartPro 5000 VA UPS System from Tripp Lite is an intelligent, line-interactive UPS that is designed to protect servers, networking and telecommunications equipment from blackouts, voltage fluctuations and surges in a compact rackmount housing. This completely self-contained UPS system occupies only 3 rack spaces (3U) in a standard 19-inch rack. Included accessories support mounting in 4-post rack enclosures. The large-capacity 5000 VA/3750 W UPS system accepts raw 208/240 V AC input, adjusting output to normal 208 V levels. One pair of 120 V outlets support up to 400 VA monitors and other low-voltage accessories. The UPS includes slot for internal SNMP/web card, plus 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data. Five outlets (two L6-20R, one L6-30R and two 5-15R) allow the connection of high-current 20- and 30-amp 208 V connectors and up to two 120 V devices (max 400 VA at 120

Tech Specs

General

Device Type

UPS - rack-mountable

Height (Rack Units)

Power Device

UPS Technology

Line interactive

Input Voltage

AC 208/240 V

Frequency Provided

60 Hz

Frequency Required

60 Hz

Input Connectors

1 x power NEMA L6-30

Power Output Connectors Details

1 x power NEMA L6-30
2 x power NEMA L6-20
2 x power NEMA 5-15

Output Voltage

AC 120/208 V + 20% / - 6% - 60 Hz

Power Capacity

3.75 kW / 5000 VA

Output Waveform

Sinewave

Circuit Protection

Circuit breaker

Battery

Run Time (Up To)

10 min at full load

Expansion / Connectivity

Interfaces

2 x serial - 9 pin D-Sub (DB-9)
2 x USB - 4 pin USB Type B
1 x remote control - RJ-11

Expansion Slots

1 (total) / 1 (free) x expansion slot

Miscellaneous

Cables Included

2 x serial cable - external
2 x USB cable - external
Power cable - external - 10 ft

Rack Mounting Kit

Included

Equipment Protection Value

250000 US Dollars

Compliant Standards

FCC Class A certified, cUL, UL 1778

Software / System Requirements

Software Included

Drivers & Utilities, TrippLite PowerAlert

Manufacturer Warranty

Service & Support

Limited warranty - 2 years

Environmental Parameters

Min Operating Temperature

32 °F

Max Operating Temperature

104 °F

Humidity Range Operating

0 - 95%

Dimensions & Weight

Width

17.5 in

Depth

22.5 in

Height

5.2 in

Weight

118.17 lbs

Add the products you would like to compare, and quickly determine which is best for your needs.

Compare Products

Top

Welcome

Welcome to Dell