TrippLite SM1000RM2U 1000VA SmartPro Line-Interactive Tower UPS System

Name: TrippLite SM1000RM2U 1000VA SmartPro Line-Interactive Tower UPS System
Brand: Tripplite
SKU: a3336399
Rating: 4.2 (9 reviews)

4.2 (9)

TrippLite SM1000RM2U 1000VA SmartPro Line-Interactive Tower UPS System thumb 1

TrippLite SM1000RM2U 1000VA SmartPro Line-Interactive Tower UPS System thumb 2

$784.26

Limited Stock

Financing Offers Learn More

Add to Cart

Manufacturer part SM1000RM2UTAA | Dell part A3336399 | Order Code a3336399 | TrippLite

Compare Compare

SM1000RM2UTAA SmartPro® Line-Interactive Rack/Tower Sine Wave UPS with Network Slot and LCD

POWER PROTECTION AND BATTERY BACKUP
for servers and network hardware

This line-interactive UPS system protects your critical network systems from damage, downtime and data loss.

Pure sine wave output improves compatibility with sensitive equipment.
Battery backup powers critical systems during outages.
Advanced AVR corrects power sags (brownouts) and overvoltages.
Surge protection blocks harmful transient voltages.
LCD shows power conditions and permits easy access to settings.
Network card slot supports optional remote access and network management.
USB and serial ports connect to computers for power management.
2-year warranty and $250,000 insurance reflect commitment to reliability.
TAA compliance meets the requirements of GSA Schedules and other government contracts

SM1000RM2UTAA SmartPro® Line-Interactive Rack/Tower Sine Wave UPS with Network Slot and LCD

slide {0} of {1}, zoom in, SM1000RM2UTAA SmartPro® Line-Interactive Rack/Tower Sine Wave UPS with Network Slot and LCD

4:06

Why is this UPS a Good Investment?

The success of any organization depends on critical information systems like servers and network hardware. If your critical systems don't have reliable power, employees can't work, communications go down, automated systems malfunction and productivity grinds to a halt. It would be nice if utility power was always reliable, but it isn't. Between severe weather, the aging electrical grid and unavoidable hazards lurking inside your own walls, your servers and network hardware are under constant attack from power problems. Even a brief loss of power or a momentary surge can damage your equipment, corrupt your data, bring down your network and hurt your bottom line.

The potential costs of downtime are alarming. Surveyed averages range from $1,167 per minute for mid-size businesses (IDC) to $7,908 per minute for larger operations (Ponemon Institute). For a tiny fraction of these costs, you can prevent damage, downtime and data loss by installing this SmartPro® UPS system. It conditions incoming AC power to protect your equipment, provides enough battery backup to outlast most outages and allows critical systems to shut down gracefully to prevent data loss and corruption during extended blackouts.

Common Applications

Protect Servers and Network Hardware
Application Servers, Storage Servers, Database Servers, File Servers, Virtualization Servers, Proxy Servers, Web Servers, Media Servers, VoIP Servers, Network-Attached Storage, Network Switches, PoE Switches, Firewalls, Network Appliances, Bridges, Gateways, Routers

Protect Equipment with Active PFC Power Supplies
Active PFC power supplies found in many devices require pure sine wave power.

Pure Sine Wave Output

When operating from battery power, a UPS system generates the waveform of its AC output. Many UPS systems generate PWM sine wave power, an approximation of the pure sine wave power you receive from your electrical utility. Although PWM sine wave power is compatible with most equipment, pure sine wave power is required by some devices -- such as computers with active PFC power supplies -- and prevents others from overheating, malfunctioning or failing prematurely. This UPS system generates pure sine wave power for superior compatibility with active PFC power supplies and other sensitive equipment.

Reliable Battery Backup

Half-Load Runtime: This UPS system will support a 50% load (400 W) for up to 15 minutes.
Hot-Swappable Batteries: The internal batteries can be replaced without turning off the UPS system and disrupting the operation of connected equipment.

Advanced AVR and Surge/Noise Protection

In locations with chronic voltage problems, frequent switching to battery drains reserve power and shortens battery life. This UPS system has a feature called automatic voltage regulation (AVR) that solves the problem. The UPS detects when input voltage is out of bounds and corrects it without using the battery.

All Tripp Lite UPS systems also include built-in surge protection and noise filtering to shield your equipment from destructive transient voltages and electromagnetic (EMI/RFI) line noise.

Flexible Management Options

There are several ways to manage this UPS system:

Use the multifunction LCD screen for comprehensive local management.
Use the USB port with your computer's built-in power management features.
Use the USB or serial port with your computer and Tripp Lite's PowerAlert® software. PowerAlert provides enhanced features like automatic file saves, event notification, logging, advanced device control and an SNMP agent that supports centralized management. Select UPS models include a convenient CD-ROM, or you can download the latest version of PowerAlert for free at Tripp Lite's website.
Install an optional network card to enable standalone network management via SNMP, Web, SSH or telnet. The network card has an Ethernet port and embedded interface, allowing you to access advanced monitoring, control and notification features without directly connecting the UPS system to a computer. The network card also supports connecting one or more optional sensors for remote temperature, humidity and contact closure monitoring. (Available network cards and sensors include TLNETCARD with TLNETEM sensor; WEBCARDLX with E2MT, E2MTDO, E2MTDI and E2MTHDI sensors; and SNMPWEBCARD with ENVIROSENSE sensor. Refer to each model for specific features.)

This UPS system also has two switched outlet banks, allowing you to reboot locked devices remotely or turn off nonessential loads during extended outages to provide additional runtime.

Multifunction LCD Screen

The illuminated LCD provides easy access to detailed UPS settings and information. The LCD shows a variety of helpful data, including input/output voltage, output load percentage, output load wattage, power status, battery status, AVR status, battery capacity, estimated backup runtime remaining and daily power consumption. If you decide to install the UPS system in a tower configuration, you can rotate the LCD for optimal viewing.

Eco-Friendly Design

High Efficiency: This UPS system saves energy, produces less heat, shrinks your carbon footprint and reduces annual operating costs.
User-Replaceable Battery: This UPS system has a user-replaceable, recyclable battery, allowing it to remain in service instead of going to a landfill.
RoHS Compliance: This UPS system complies with the RoHS (Restriction of Hazardous Substances) Directive, limiting the use of hazardous substances in manufacturing.

Dependable Service from an Industry Leader

Service and Support

2-Year Product Warranty: If this UPS system (including the internal battery) proves defective in material or workmanship within that period, Tripp Lite will repair or replace it at no charge.
$250,000 Insurance: Tripp Lite will repair or replace connected equipment damaged by surges – even lightning strikes!
Free Tech Support: Chicago-based, in-house tech specialists are available by phone, email and chat.

Industry Leader

Over 90 Years: Founded in 1922, Tripp Lite has a long-established and proven track record of providing reliable products and responsive customer service.
Trusted Name: From the smallest office to the largest data center, customers worldwide trust Tripp Lite to power, protect, manage and connect valuable IT equipment.
Third-Party Safety Testing and ISO 9001 Certification

Key Specifications

Model: SM1000RM2UTAA
Load Capacity: 1 kVA (.8 kW)
Power Factor: 0.8
Nominal AC Input: 120V, 60 Hz
Nominal AC Output: 120V, 60 Hz
AC Outlets: 6 x 5-15R
Switched Outlet Banks: 2 Banks of 2 Outlets
Output Waveform (AC Mode): Sine Wave
Output Waveform (Battery Mode): Pure Sine Wave
Input Cord: 10 ft. (3 m) Cord with 5-15P Plug
Half-Load Runtime: 15 min. (400 W Load)
Communications: USB Port (HID-Compliant); Serial Port (DB9); Network Card Slot; EPO
User-Replaceable Battery: Yes (RBC24V-LCD)
Primary Form Factor: 2U Rack (Supports 4-post rack installation with included kit. Add 2POSTRMKITWM for 2-post rack or wall-mount installation. Add 2-9USTAND for tower installation.)
Dimensions: 3.5 x 17.5 x 12.5 in. (8.9 x 44.5 x 31.75 cm)
Weight: 35.4 lb. (16.1 kg)
Standards: UL 1778 (USA); CSA (Canada); NOM (Mexico); FCC (EMI); TAA; RoHS
Product Warranty (Worldwide): 2-Year Limited Warranty
Connected Equipment Insurance (U.S., Canada and Puerto Rico): $250,000
What's Included: UPS, 4-Post Rack Installation Kit, USB/Serial/EPO Cabling, PowerAlert Software, Manual

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Actual products may differ slightly from photos. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. Runtime varies with load, battery condition and other factors. Go to Tripp Lite's website for more information, including complete warranty terms and conditions.

Documents

Tripp Lite's SM1000RM2U is intelligent, line-interactive sine wave rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. It requires only two rack spaces (2U) in a standard rack enclosure. 1000VA/700 watt power handling capability and full time sine wave output supports networking, telecom and other sensitive electronic applications. It includes a total of 6 outlets arranged in 2 load banks that are individually controllable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. It supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory card slot, USB and DB9 serial monitoring ports. Communications ports support messaging of detailed UPS operating parameters and line power status. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise.

Tech Specs

General

Device Type

UPS - external

Battery Enclosure Type

Internal

Height (Rack Units)

Rack Size

19"

Power Device

Input Voltage

AC 120 V

Frequency Provided

60 Hz

Frequency Required

60 Hz

Input Connectors

Power NEMA 5-15

Power Output Connectors Details

6 x power NEMA 5-15

Output Voltage

120 V + 8% / - 21% - 60 Hz

Max Electric Current

15 A

Power Capacity

800 Watt / 1000 VA

Output Waveform

Sinewave

Circuit Protection

Circuit breaker

Battery

Voltage Provided

24 V

Run Time (Up To)

7 min at full load

Recharge Time

4 hours

Networking

Remote Management Interface

RS-232, USB

Expansion / Connectivity

Interfaces

1 x RS-232 - 9 pin D-Sub (DB-9)
1 x USB

Miscellaneous

Cables Included

Power cable - integrated - 10 ft
Serial cable - external
USB cable - external

Rack Mounting Kit

Included

Equipment Protection Value

250000 US Dollars

Features

Audible alarm, Automatic Voltage Regulation (AVR), LED indicators, overvoltage protection, undervoltage protection, disconnect switch

Compliant Standards

CSA, NOM, UL 1778, FCC Part 15 B, RoHS

TAA Compliant

Yes

Software / System Requirements

Software Included

TrippLite PowerAlert

Manufacturer Warranty

Service & Support

Limited warranty - 2 years

Environmental Parameters

Min Operating Temperature

32 °F

Max Operating Temperature

104 °F

Humidity Range Operating

0 - 95%

Dimensions & Weight

Width

17.5 in

Depth

13.5 in

Height

3.5 in

Weight

35.05 lbs

Dimensions & Weight (Shipping)

Shipping Width

24 in

Shipping Depth

20.2 in

Shipping Height

9 in

Shipping Weight

41.45 lbs

Add the products you would like to compare, and quickly determine which is best for your needs.

Compare Products

Top

Welcome

Welcome to Dell