Automatic internal bypass:
utility power to the connected loads in the event of a UPS power overload
additional run time to be quickly added as needed.
Intelligent battery management:
battery performance, life, and reliability through intelligent, precision
Automatic restart of loads after UPS shutdown:
clean, uninterrupted power to protected equipment while batteries are
Temperature-compensated battery charging:
starts up the connected equipment upon the return of utility power.
battery life by regulating the charge voltage according to battery
InfraStruXure Manager Compatible:
remote power management of the UPS over the network.
centralized management via the APC InfraStruXure Manager.
UPS capabilities with management cards.
LED status indicators:
understand unit and power status with visual indicators.
management of the UPS via a serial port.
Plug-and-Play external batteries:
clean, uninterrupted power to the loads when adding extra runtime to the
Flash upgradeable firmware:
the initial investment in the UPS when migrating from tower to rack-mount
maintenance releases of firmware remotely using FTP.
availability by allowing a trained user to perform upgrades and
replacements of the batteries reducing Mean Time to Repair (MTTR)
Predicitive failure notification:
battery self-test ensures early detection of a battery that needs to be
Disconnected battery notification:
early-warning fault analysis ensuring proactive component replacement.
when a battery is not available to provide backup power.
notification of changing utility power and UPS power conditions
Frequency and voltage regulation:
higher application availability by correcting poor frequency and voltage
conditions without using the battery.
Input power factor correction:
connected loads from surges, spikes, lightning, and other power
installation costs by enabling the use of smaller generators and cabling.
clean, uninterrupted power to protected equipment when generator power is
Resettable circuit breaker:
temporary battery power when the utility power is out.
recovery from overloads; no need to replace a fuse.
the product has been tested and approved to work safely with the
connected service provider equipment and within the specified