Supported Cameras | - All D-Link network cameras
- Includes support for auto-discovery
- Up to 3 megapixel resolution
|
Recording Performance (NVR Only Mode) | - H.264 1080p (bitrate): 90 Mbps
- H.264 720p (bitrate): 90 Mbps
- MJPEG 1080p (frame rate): 90 fps
- MJPEG 720p (frame rate): 192 fps
|
Recording Performance (NVR + File Server Mode) | - H.264 1080p (bitrate): 68 Mbps
- H.264 720p (bitrate): 68 Mbps
- MJPEG 1080p (frame rate): 70 fps
- MJPEG 720p (frame rate): 150 fps
|
| Camera Search | |
| Audio & Video Recording | - Synchronized audio & video recording
|
| Compression Formats | |
| Video Settings | - Resolution, quality, frame rate, enable audio, go to camera interface
|
| Recording Type | - Record by schedule, manual, and event-based recording
- Motion-triggered recording
|
| Remote Live View | - Supported via IE Explorer (Up to 9 simultaneous channels)
- Supports mydlink.com web portal (1 simultaneous channel)
|
| Remote Live View Control | - Live view, preset/go, patrol, focus, PTZ functions, snapshot, full screen, digital zoom
|
| Remote Playback | - Supported via IE and NVR client
- Playback system with timeline GUI, search by motion detection, cameras, date and time
- Internet Explorer and NVR client support 1-channel playback
- Digital zoom
|
| Overwrite Recording | - Auto recycling when disk storage is full
|
| File Export | - Export videos to AVI or ASF file
- Export images to BMP or JPG file
|
| User Account | - Additional accounts can be created to allow user access to the system, and specify authorization for camera channels, PTZ, etc
|
| System Time | - D-Link NTP, manual input, sync with computer
- Daylight Saving Time support
|
| DDNS | - D-Link DDNS server support
|
| Remote Backup | - Remote software can backup raw data to redundant storage
- Auto backup of previous day’s video to FTP server
|
| System Status | - Camera status, System status
- Still picture EMAP support
|
| Network Service Protocols | - IPV4, ARP, TCP, UDP, ICMP
- DHCP Client
- NTP Client (D-Link)
- DNS Client
- DDNS Client (D-Link)
- SMTP Client
- HTTP Server
- PPPoE
- UPnP
- IP filtering
|
| User Interface | - HTTP Web browser
- Internet Explorer 7 or later
- NVR Search utility
- Multiple Language GUI
|
| Hard Disk1 | - Hard Disk control & management via PC
- Reformat Disk
- RAID 0
- RAID 1
- JBOD
|
| Two Reset Modes | - Reset firmware GUI button
- HW reset button (hold for 5 seconds)
|
| Flash Rom | |
| RAM | |
| Network Interface | - Gigabit Ethernet LAN port (10/100/1000 Mbps)
|
| I/O ports | - RJ45 port
- DC-in jack
- USB port for UPS status update (optional)
|
| Power Adapter | |
| Power Consumption | - Max. power consumption: 25.20 W
- Standby state max. power consumption: 0.23 W
|
| Dimensions (W x D x H) | - 4.5 x 5.75 x 7 inches (115 x 146.4 x 178.5 mm)
|
| Weight | |
| Operating Temperature | - 32˚ to 131˚ F (0˚ to 55˚ C)
|
| Storage Temperature | - -4˚ to 158˚ F (-20˚ to 70˚ C)
|
| Operating Humidity | - 5% to 90% (non-condensing)
|
| Certifications | |
| Warranty | |
| Order Information | - DNR-322L - mydlink 2-Bay Network Video Recorder
|
All references to speed are for comparison purposes only. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
1) Hard drive(s) is not included. An internal 3.5” SATA 2.0 drive is required to store or share files and must be formatted before use. RAID 0 and RAID 1 require the use of two (2) SATA drives. To avoid drive incompatibility in RAID 0 or RAID 1 operation, use SATA drives from the same manufacturer. Formatted drive capacity for RAID 1 operation is dependent on the drive capacity of the lower-sized drive. May not work with older generation SATA drives. For a list of SATA drives that have been tested to work with the DNR-322L visit dlink.com.
2) 1-Year Limited Warranty available only in the USA and Canada.
PDF, 1.58MB,