INTL 13U WALL-MOUNT ENCLOSURE W/ VENTED FRONT DOOR
Specialty EnclosuresIT enclosures designed for specific environments and applications
Specialty enclosures ensure reliable operation of your rack mount IT equipment in unique environments. Wall mount enclosures are designed for small hub and LAN applications in wiring closets and server rooms with floor space constraints. Seismic enclosures are heavy duty enclosures that can be deployed in Zone 4 regions that require the safety and ruggedness of an NEBS rated enclosure.
- Adjustable Front Vertical Mounting Rail - The front mounting rails can be adjusted to allow for various mounting depths and to allow for additional clearance from the front door.
- Ships fully assembled - NetShelter VX Enclosures ship fully assembled reducing the time required to install equipment.
- Doors open 180 degrees - Two people are often required to stand in front of an enclosure on opposite sides to install heavy rack-mount equipment. A door that opens 180 degrees allows for installation of equipment without the need to remove the door making installation fast and easy.
- Adjustable mounting depth - Vertical mounting rails are adjustable for equipment with various mounting depths.
Which Rack is right for you?
|Net Weight||94.00 lbs. (42.73 kg)|
|Maximum Height||26.09 inches (663 mm)|
|Maximum Width||23.00 inches (584 mm)|
|Maximum Depth||24.86 inches (631 mm)|
|Weight Capacity (static load)||200.00 lbs. (90.91 kg)|
|Maximum Mounting Depth||19.00 inches (483 mm)|
|Vertical Posts||16 gauge|
|Front Door||16 gauge|
|Rear Door||13 gauge|
|EIA Mounting Rails||16 gauge|
|Side Panels||18 gauge|
|Standard Warranty||5 year repair or replace|
|Sustainable Offer Status|
|REACH||REACH: Contains No SVHCs|
The APC® NetShelter® WX 13U Enclosure is specifically designed for networking professionals to securely store and wire 19-inch EIA compatible equipment such as hubs, routers, concentrators and patch panels. It is suited for small hub and LAN applications within wiring closets and computer rooms with floor space constraints. You can mount the enclosure directly to building walls with the four key hole slots spaced 16" apart on the rear door. The eight 2" cable access holes located at the top, sides, and bottom of the rear door provide you with ample cabling provisions. The front mounting rails with threaded holes can be adjusted to allow for various mounting depths and to allow for additional clearance from the front door. This enclosure comes in a double-hinged design — providing front and rear access to the installed equipment.
Add the products you would like to compare, and quickly determine which is best for your needs.