Cart

Subtotal:
USA
USA

    TrippLite PDUMH20AT Single-Phase Auto Transfer Switch/ Metered Power Distribution Unit

    $435.76
    Free Shipping Exceptions to included shipping may apply for remote locations.
    Dell Business Credit As low as $15/mo.^ Apply for credit
    Get up to $13 back in rewards
    Add to Cart
    Manufacturer part PDUMH20AT | Dell part A1188645 | Order Code a1188645 | TrippLite
    Compare
    PDU Metered ATS 120V 20A 5-15/20R 16 Outlet L5-20P Horizontal 1URM

    Do you need an efficient, cost-effective way to distribute, monitor and manage power in an IT or industrial environment? Tripp Lite's PDUMH20AT Metered Power Distribution Unit with ATS is the solution you seek! It provides sixteen outlets plus a digital meter that displays continuous power consumption, enabling IT personnel to monitor the PDU's load on site. Optional integrated automatic transfer switching capability enables dual AC input redundancy for critical network hardware, hot-swappable UPS maintenance bypass or dual UPS protection. The PDUMH20AT is also equipped with a built-in SNMPWEBCARD slot, enabling it to be permanently upgraded to a switched PDU. The PDUMH20AT features an all-metal housing and a switchless design to prevent accidental shutoff. It is suitable for 1U rackmount installation as well as wall-mount, workbench, under-counter and similar installations.
    Product image

    Media

    Optimized for Demanding Applications

    The PDUMH20AT is designed for reliable distribution of AC power to supported equipment in IT, industrial and similar applications. It features a rugged all-metal case, high-quality outlets, a 20A circuit breaker and a switchless design to prevent accidental shutoff. Auto-Transfer Switching function adds hot-swap and maintenance bypass ability to standard UPS configurations.


    Reliable IT Power Distribution

    Unfiltered electrical pass-through makes the PDUMH20AT ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets, and more. It provides sixteen 5-15/20R outlets and dual 12-ft. cords (one attached, one detachable) with locking L5-20P plugs to prevent accidental disconnection. Two included L5-20R to 5-20P plug adapters enable the PDU to be connected to standard 5-15/20R outlets.
    Integrated Auto-Transfer Switching & Hot-Swap

    The PDUMH20AT features optional integrated automatic transfer switching (ATS) capability to provide a redundant power option for networking and server applications with non-redundant internal power supplies. In ATS mode, the attached power cord delivers primary input power and the included detachable power cord provides secondary input power. If primary power becomes unstable or fails, the PDU automatically switches to the secondary power source. Additionally, ATS enables fault-tolerant hot-swappable UPS protection when used with a single UPS system, and fully redundant UPS protection when each power cord is connected to a separate UPS system. Front-panel input LEDs indicate primary or secondary power availability.

    Digital Current Meter


    Assure proper load balance with the PDUMH20AT's easy to read, two-character digital LED meter that displays the total connected equipment load. This meter enables IT personnel to monitor the total load on the PDU in real time, allowing more equipment to be safely connected with no danger of overloading the PDU or power supply circuits. Plus, the outlets are factory programmed for sequential turn-on when the PDU is first powered on to prevent inrush-related equipment interaction on start-up and safeguard against costly overloads.
    Optional Advanced Power Management

    A built-in SNMPWEBCARD slot enables the PDUMH20AT to be permanently upgraded to a switched PDU with full network power monitoring and individual outlet control capability. With an SNMPWEBCARD installed, the PDUMH20AT can also be custom programmed for power-on and power-off sequences with user-specified time delays in response to loss and restoration of primary input power.


    Switchless Design


    The PDUMH20AT's switchless design prevents accidental shutoff and safeguards against downtime due to human error. The L5-20P plug locks into place to maintain a secure connection.
    Versatile Installation Options

    The PDUMH20AT is easy to integrate with a wide range of data center and network applications. It is suitable for 1U installation in standard 19-inch rack enclosures as well as wall-mount, workbench, under-counter and similar installations. Two included L5-20R to 5-20P plug adapters enable the PDU to be connected to standard 5-15/20R outlets.
    2-Year Warranty

    For your peace of mind, the PDUMH20AT comes with a 2-year warranty.


    What's in the Box
    • PDUMH20AT Metered PDU with ATS
    • Mounting Hardware
    • Detachable C19 to L5-20P Power Cord (12 ft./3.6 m)
    • 2 x L5-20R to 5-20P Plug Adapters
    • Owner's Manual with Warranty Information
    Why Choose Tripp Lite?

    Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect, house and protect your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.

    Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

    Quick Specs


    Device Type
    Power distribution unit - rack-mountable
    Rack Size
    1U
    Weight
    12.13 lbs
    Input Voltage
    AC 120 V
    Output Voltage
    AC 120 V
    Power Capacity
    1.9 kW / 2400 VA
    Input Connectors
    2 x power NEMA L5-20
    Output connectors
    16 x power NEMA 5-15/20
    Color
    Black
    Dimensions (WxDxH)
    17.5 in x 14.5 in x 1.7 in
    Manufacturer Warranty
    2-year warranty

    General


    Device Type
    Power distribution unit - rack-mountable
    Height (Rack Units)
    1U
    Color
    Black

    Power Device


    Input Voltage
    AC 120 V
    Frequency Provided
    50/60 Hz
    Frequency Required
    50/60 Hz
    Input Connectors
    2 x power NEMA L5-20
    Power Output Connectors Details
    16 x power NEMA 5-15/20
    Output Voltage
    AC 120 V 50/60 Hz
    Max Electric Current
    20 A
    Power Capacity
    1.9 kW / 2400 VA

    Expansion / Connectivity


    Interfaces
    1 x management - 9 pin D-Sub (DB-9)
    Expansion Slots
    1 (total) / 1 (free) x expansion slot

    Miscellaneous


    Cables Included
    • Power cable - external - 12 ft
    • Power cable - integrated - 12 ft
    • 2 x power connector adapter 5.9 in
    Features
    Wall mountable, current meter, amp meter, LED indicators, Automatic Transfer Switch (ATS)
    Compliant Standards
    NOM, RoHS

    Manufacturer Warranty


    Service & Support
    Limited warranty - 2 years

    Environmental Parameters


    Min Operating Temperature
    32 °F
    Max Operating Temperature
    104 °F
    Humidity Range Operating
    0 - 95%

    Dimensions & Weight


    Width
    17.5 in
    Depth
    14.5 in
    Height
    1.7 in
    Weight
    12.13 lbs

    Dimensions & Weight (Shipping)


    Shipping Width
    22.5 in
    Shipping Depth
    23.5 in
    Shipping Height
    6.3 in
    Shipping Weight
    16.31 lbs

    Ratings & Reviews



    Compare Products ()

    Add the products you would like to compare, and quickly determine which is best for your needs.

    Add the products you would like to compare, and quickly determine which is best for your needs.
    Top