Cart

Subtotal:
USA
USA

    TrippLite SmartPro 1kVA 1-Units Line Interactive Sine Wave Rackmount UPS

    The Smart Pro Rackmount 1000 VA UPS System from Tripp Lite is an intelligent, line-interactive sine wave rack/tower uninterruptible power supply that prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transien ...  Show More
    $706.53
    Temporarily Out of Stock
    Manufacturer part SMART1000RM1U | Dell part A0244334 | Order Code a0244334 | TrippLite
    Compare

    SMART1000RM1U SmartPro® Line-Interactive Rack/Tower Sine Wave UPS with Network Slot

    POWER PROTECTION AND BATTERY BACKUP
    for servers and network hardware

    This line-interactive UPS system protects your critical network systems from damage, downtime and data loss.
    • Pure sine wave output improves compatibility with sensitive equipment.
    • Battery backup powers critical systems during outages.
    • Advanced AVR corrects power sags (brownouts) and overvoltages.
    • Surge protection blocks harmful transient voltages.
    • LED indicators signal power, voltage correction, load level and battery charge state.
    • Network card slot supports optional remote access and network management.
    • USB and serial ports connect to computers for power management.
    • 3-year warranty and $250,000 insurance reflect commitment to reliability.
    • ENERGY STAR certified efficiency helps you save money, save energy and protect the environment.
    SMART1000RM1U SmartPro® Line-Interactive Rack/Tower Sine Wave UPS with Network Slot
    Why is this UPS a Good Investment? 4:06

    Why is this UPS a Good Investment?

    The success of any organization depends on critical information systems like servers and network hardware. If your critical systems don't have reliable power, employees can't work, communications go down, automated systems malfunction and productivity grinds to a halt. It would be nice if utility power was always reliable, but it isn't. Between severe weather, the aging electrical grid and unavoidable hazards lurking inside your own walls, your servers and network hardware are under constant attack from power problems. Even a brief loss of power or a momentary surge can damage your equipment, corrupt your data, bring down your network and hurt your bottom line.

    The potential costs of downtime are alarming. Surveyed averages range from $1,167 per minute for mid-size businesses (IDC) to $7,908 per minute for larger operations (Ponemon Institute). For a tiny fraction of these costs, you can prevent damage, downtime and data loss by installing this SmartPro® UPS system. It conditions incoming AC power to protect your equipment, provides enough battery backup to outlast most outages and allows critical systems to shut down gracefully to prevent data loss and corruption during extended blackouts.

    Common Applications

    Protect Servers and Network Hardware
    Application Servers, Storage Servers, Database Servers, File Servers, Virtualization Servers, Proxy Servers, Web Servers, Media Servers, VoIP Servers, Network-Attached Storage, Network Switches, PoE Switches, Firewalls, Network Appliances, Bridges, Gateways, Routers

    Protect Equipment with Active PFC Power Supplies
    Active PFC power supplies found in many devices require pure sine wave power.

    Pure Sine Wave Output

    When operating from battery power, a UPS system generates the waveform of its AC output. Many UPS systems generate PWM sine wave power, an approximation of the pure sine wave power you receive from your electrical utility. Although PWM sine wave power is compatible with most equipment, pure sine wave power is required by some devices -- such as computers with active PFC power supplies -- and prevents others from overheating, malfunctioning or failing prematurely. This UPS system generates pure sine wave power for superior compatibility with active PFC power supplies and other sensitive equipment.

    Reliable Battery Backup

    • Half-Load Runtime: This UPS system will support a 50% load (400 W) for up to 14 minutes.
    • Hot-Swappable Batteries: The internal batteries can be replaced without turning off the UPS system and disrupting the operation of connected equipment.

    Advanced AVR and Surge/Noise Protection

    In locations with chronic voltage problems, frequent switching to battery drains reserve power and shortens battery life. This UPS system has a feature called automatic voltage regulation (AVR) that solves the problem. The UPS detects when input voltage is out of bounds and corrects it without using the battery.

    All Tripp Lite UPS systems also include built-in surge protection and noise filtering to shield your equipment from destructive transient voltages and electromagnetic (EMI/RFI) line noise.

    Flexible Management Options

    There are several ways to manage this UPS system:
    1. Use the front-panel LEDs for convenient local management.
    2. Use the USB port with your computer's built-in power management features.
    3. Use the USB or serial port with your computer and Tripp Lite's PowerAlert® software. PowerAlert provides enhanced features like automatic file saves, event notification, logging, advanced device control and an SNMP agent that supports centralized management. Select UPS models include a convenient CD-ROM, or you can download the latest version of PowerAlert for free at Tripp Lite's website.
    4. Install an optional network card to enable standalone network management via SNMP, Web, SSH or telnet. The network card has an Ethernet port and embedded interface, allowing you to access advanced monitoring, control and notification features without directly connecting the UPS system to a computer. The network card also supports connecting one or more optional sensors for remote temperature, humidity and contact closure monitoring. (Available network cards and sensors include TLNETCARD with TLNETEM sensor; WEBCARDLX with E2MT, E2MTDO, E2MTDI and E2MTHDI sensors; and SNMPWEBCARD with ENVIROSENSE sensor. Refer to each model for specific features.)
    This UPS system also has two switched outlet banks, allowing you to reboot locked devices remotely or turn off nonessential loads during extended outages to provide additional runtime.

    LED Control Panel

    The intuitive multicolor LEDs display a variety of helpful and important information, including power status, voltage regulation status, connected load level, battery charge level and battery condition.

    Eco-Friendly Design

    • ENERGY STAR Certification: This UPS system has ENERGY STAR certification. It helps you save money, save energy and protect the environment by meeting strict efficiency guidelines set by the U.S. Environmental Protection Agency.
    • User-Replaceable Battery: This UPS system has a user-replaceable, recyclable battery, allowing it to remain in service instead of going to a landfill.
    • RoHS Compliance: This UPS system complies with the RoHS (Restriction of Hazardous Substances) Directive, limiting the use of hazardous substances in manufacturing.

    Dependable Service from an Industry Leader

    Service and Support
    • 3-Year Product Warranty: If this UPS system (including the internal battery) proves defective in material or workmanship within that period, Tripp Lite will repair or replace it at no charge.
    • $250,000 Insurance: Tripp Lite will repair or replace connected equipment damaged by surges – even lightning strikes!
    • Free Tech Support: Chicago-based, in-house tech specialists are available by phone, email and chat.
    Industry Leader
    • Over 90 Years: Founded in 1922, Tripp Lite has a long-established and proven track record of providing reliable products and responsive customer service.
    • Trusted Name: From the smallest office to the largest data center, customers worldwide trust Tripp Lite to power, protect, manage and connect valuable IT equipment.
    • Third-Party Safety Testing and ISO 9001 Certification

    Key Specifications

    Model: SMART1000RM1U
    Load Capacity:
    1 kVA (800 kW)
    Power Factor: 0.8
    Nominal AC Input: 120V, 60 Hz
    Nominal AC Output: 120V, 60 Hz
    AC Outlets: 6 x 5-15R
    Switched Outlet Banks: Two switchable single-outlet 5-15R load banks
    Output Waveform (AC Mode): Pure Sine Wave
    Output Waveform (Battery Mode): Pure Sine Wave
    Input Cord: 10 ft. (3 m) Cord with 5-15P Plug
    Half-Load Runtime: 14 min. (400 W Load)
    Communications:
    USB Port (HID-Compliant); Serial Port (DB9); Network Card Slot; EPO
    User-Replaceable Battery: Yes (RBC69-1U)
    Primary Form Factor: 1U Rack (Supports 2- or 4-post rack installation with included kit. Add 4POSTRAILKIT1U for extra support in a 4-post rack.)
    Dimensions: 1.75 x 17.5 x 16.75 in. (4.5 x 44.5 x 42.6 cm)
    Weight: 32 lb. (14.6 kg)
    Standards: UL 1778 (USA); CSA (Canada); NOM (Mexico); FCC (EMI); ENERGY STAR; RoHS
    Product Warranty (Worldwide): 3-Year Limited Warranty (Registration required for third year.)
    Connected Equipment Insurance (U.S., Canada and Puerto Rico): $250,000
    What's Included: UPS, 4-Post Rack Installation Kit, USB/Serial/EPO Cabling, PowerAlert Software, Manual

    ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Actual products may differ slightly from photos. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. Runtime varies with load, battery condition and other factors. Go to Tripp Lite's website for more information, including complete warranty terms and conditions.

    The Smart Pro Rackmount 1000 VA UPS System from Tripp Lite is an intelligent, line-interactive sine wave rack/tower uninterruptible power supply that prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requiring only two rack spaces (1U) in a standard rack enclosure, its large internal batteries offer 25 minutes half load runtime and 10 minutes at full load. Maintaining a regulated 120 V nominal output without using battery power during brownouts and over-voltages from 83 V to 147 V, its 1000 VA / 640 W power handling capability and full time sine wave output supports networking, telecom and other sensitive electronic applications. Equipped with a total of 6 outlets arranged in 2 load banks that are individually controllable via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment, it supports simultaneous remote

    Quick Specs


    Device Type
    UPS - rack-mountable
    Rack Size
    1U
    Weight
    24.91 lbs
    Load Rating
    Small LAN / file server
    Input Voltage
    AC 120 V
    Output Voltage
    AC 120 V
    Power Capacity
    800 Watt / 1000 VA
    Input Connectors
    1 x power NEMA 5-15
    Output connectors
    6 x power NEMA 5-15
    Run Time (Up To)
    14 min at half load
    Dimensions (WxDxH)
    17 in x 16 in x 1.8 in
    Manufacturer Warranty
    3-year warranty with product registration

    General


    Device Type
    UPS - rack-mountable
    Height (Rack Units)
    1U

    Power Device


    Load Rating
    Small LAN / file server
    UPS Technology
    Line interactive
    Input Voltage
    AC 120 V
    Frequency Provided
    60 Hz
    Frequency Required
    60 Hz
    Input Connectors
    1 x power NEMA 5-15
    Power Output Connectors Details
    6 x power NEMA 5-15
    Output Voltage
    AC 120 V 60 Hz
    Power Capacity
    800 Watt / 1000 VA
    Surge Suppression
    Yes
    Surge Energy Rating
    1800 Joules
    Circuit Protection
    Circuit breaker

    Battery


    Run Time (Up To)
    14 min at half load

    Expansion / Connectivity


    Interfaces
    • 1 x RS-232 - 9 pin D-Sub (DB-9)
    • 1 x USB - 4 pin USB Type B
    • 1 x management - RJ-11
    Expansion Slots
    1 (total) / 1 (free) x expansion slot

    Miscellaneous


    Cables Included
    Power cable - external - 10 ft
    Equipment Protection Value
    250000 US Dollars

    Software / System Requirements


    Software Included
    TrippLite PowerAlert

    Manufacturer Warranty


    Service & Support
    Limited warranty - 3 years with product registration

    Environmental Parameters


    Min Operating Temperature
    32 °F
    Max Operating Temperature
    104 °F
    Humidity Range Operating
    0 - 95%

    Dimensions & Weight


    Width
    17 in
    Depth
    16 in
    Height
    1.8 in
    Weight
    24.91 lbs

    Compare Products ()

    Add the products you would like to compare, and quickly determine which is best for your needs.

    Add the products you would like to compare, and quickly determine which is best for your needs.
    Top