Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Número del artículo: 000128990

PowerStore Alerts: VMware DRS service configuration became invalid, recovery started

Resumen: PowerStore vSphere cluster DRS service configuration became invalid. PowerStore X

Contenido del artículo

Síntomas

When Dell PowerStore encounters a problem, an error alert is generated to help identify the issue. This article explains the different possible causes and the relevant solutions for these error alerts. If your problem is not resolved despite the solution provided, check the technical support contact options.

 

SLN317189_en_US__1icon Note: Cannot find the information you need? Let us know via the feedback form at the bottom of this article.

 

Resolución

Alert ID RESOURCE_BALANCER_DRS_CONFIG_RECOVERING
Alert Text VMware DRS service configuration became invalid. Recovery started.
Error Code (0x00A00502)
Description PowerStore vSphere cluster Distributed Resource Scheduler (DRS) service is misconfigured. Resource balancer and Non-Disruptive Upgrade (NDU) services require a valid DRS service configuration.
DRS service must be turned on and DRS automation level should be set to partially automated. The system is attempting to setup the required DRS service configuration. In case of a failure, the alert will be raised until the issue is fixed. 
Resolution Cause
PowerStore vSphere cluster DRS service configuration became invalid. System is unable to fix configuration automatically.

Solution
Try to restore required DRS service configuration: Turn on DRS service for PowerStore cluster in vSphere and set DRS automation level to partially automated.
See Enable vSphere HA and vSphere DRS in a Cluster and Edit Cluster Settings. Configuring the DRS with automation level to partially automated is required, other parameters should stay with default values. 

Propiedades del artículo

Producto comprometido

PowerStore

Fecha de la última publicación

21 feb 2021

Versión

3

Tipo de artículo

Solution

Volver al principio