Verify that the iscsi.conf file has been edited or that the sample file included on the MD3000i ResourceCD has been copied to the /etc/ directory.
(For Linux®)
Review and note any kernel messages (/var/log/messages) for any errors that may be related to this issue. (For Linux®)
If the iSCSI service still fails to start, contact Dell Technical Support.
If this does not resolve the issue, try going through the top section again.
Note:
If these steps do not resolve the issue, please, contact Dell Technical support..
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.
ID do artigo: SLN156049
Data da última modificação: 03/24/2017 03:14 PM
Classifique este artigo
Preciso
Úteis
Fácil de entender
Este artigo foi útil?
Sim Não
Envie seus comentários
Os comentários não podem conter estes caracteres especiais: <>()\
Infelizmente, o nosso sistema de feedback está atualmente desativado. Tente novamente mais tarde.
Agradecemos o feedback.
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Selecione se o artigo foi útil ou não.
Os comentários não podem conter estes caracteres especiais: <>()\