When your Dell PC, monitor or tablet does not seem to be working correctly, diagnostic tools are available to help you identify what the issue may be, and provide troubleshooting steps to help resolve the issue.
Dell PCs and tablets come with pre-boot diagnostics (called 32-bit Diagnostics, PSA and ePSA), also newer computers has the Dell SupportAssist application installed to help you diagnose hardware problems.
It is recommended that you first run a diagnostic test to check for common errors with the hardware devices on your PC, monitor or tablet. You can choose to run a quick test, full test or even test a selection of hardware devices (custom test) on your Dell PC or tablet.
If the diagnostic test identifies a hardware issue, you can review troubleshooting suggestions that can help you resolve the problem, capture error codes that can help you fix your device or get replacement parts without calling technical support.
Dell's online diagnostics help you troubleshoot a problem, get automated fixes and order replacement parts. Online diagnostics installs Dell SupportAssist to help you troubleshoot your Dell PC.
Run a quick test to check for common errors with the processor, hard disk drive, memory and optical drive (CD/DVD/Blu-Ray) on your Windows-based PC or tablet. If an error is detected, we will fix it automatically, suggest troubleshooting steps, recommend further tests or help you get compatible replacement parts. This test will take approximately 10 minutes to complete. Run Quick Test or Run Stress Test.
Test a specific device or choose multiple hardware devices that you want to test. We will combine your selections into a single test to run. This test will take approximately 20 minutes or more to complete, depending on the selected hardware devices.
Run a full test to perform a thorough analysis of your Dell PC or tablet. This test runs a stress test on all the hardware devices on your Dell PC or tablet. This test will take approximately 40 minutes or more to complete. Run Full Test.
Dell PCs, tablets and monitors come with pre-boot or built-in diagnostics which can help diagnose hardware issues and capture error codes. Built-in or pre-boot diagnostics are run before the PC boots into the operating system. Running a built-in or pre-boot diagnostics does not require your PC to be connected to the internet.
Dell ePSA or PSA diagnostics are available on Dell laptops, desktops, servers and Windows-based tablets.
Use the Dell Interactive Support Agent (English only) to get information about ePSA or PSA diagnostic error codes.
Alternatively, you can visit the SupportAssist Pre-Boot System Performance Check page to get more information about ePSA or PSA diagnostic error codes.
To learn more about Dell ePSA or PSA diagnostics, visit the Dell knowledge-base article Resolve Hardware Issues With Built-in and Online Diagnostics (ePSA or PSA Error Codes).
Dell monitors are equipped with a built-in diagnostic tool that helps determine if the screen abnormality you are experiencing is an inherent problem with the Dell monitor or with the video card (GPU) and PC settings.
To learn how to run built-in diagnostics on a Dell monitor, refer to the Dell knowledge-base article How Do I Run Diagnostics on a Dell monitor?
Dell laptop PCs have a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with the LCD (screen) of the Dell laptop PC or with the video card (GPU) and PC settings.
To run diagnostics on a Dell laptop LCD, refer to the Dell knowledge-base article How do I Run Diagnostics on a Dell Laptop LCD?
Dell SupportAssist proactively checks the health of your PC's hardware and software. When an issue is detected, SupportAssist notifies you. SupportAssist is preinstalled on all new Dell home PCs and tablets. If you have a device less than a year old, simply search your device for "SupportAssist" and run the application. If your device did not come with SupportAssist preinstalled or you want to reinstall SupportAssist, make sure that your device meets the minimum system requirements and download SupportAssist for PCs and tablets.
To learn more about Dell SupportAssist, visit the Dell knowledge-base article Dell SupportAssist for PC's and Tablets
Older (legacy) Dell computers ship with a utility partition on the hard drive that contains the legacy 32-bit Dell Diagnostic Utility, to help you determine any hardware issues.
To run the built-in 32-bit diagnostics, perform the following steps:
SupportAssist Enterprise is our comprehensive and easy to use, proactive and predictive, automated support technology. SupportAssist automatically identifies hardware faults, creates a case, and initiates contact from Dell EMC to the customer.
SupportAssist Enterprise monitors up to 15,000 server, storage and networking devices. It can be used as a stand-alone application or with OpenManage Essentials (OME) or Microsoft System Center Operations Manager (SCOM). SupportAssist Enterprise can be downloaded on either a Windows or Linux management server.
For technical documents, videos or to ask questions visit our SupportAssist Community at Dell.com/SupportAssistGroup.
To learn more about different diagnostic tools available for servers, storage and networking products, visit our Servers, Storage and Networking support library on how to run the online diagnostics.
Article ID: SLN114988
Last Date Modified: 07/09/2018 07:23 AM
Thank you for your feedback.