Windows Server - Unable to Connect to a Computer via SBS 2011 Remote Web Access

Windows Server - Unable to Connect to a Computer via SBS 2011 Remote Web Access



Article Summary: This article provides information on an error that may occur when you attempt to connect to a remote machine via Remote Web Access (RWA) in Windows Small Business Server 2011.


You may receive the following error when trying to connect to a remote machine through Remote Web Access (RWA) on a Small Business Server 2011 server:

This computer can't connect to the remote computer because the Remote Desktop Services Gateway server is temporarily unavailable. Try reconnecting later or contact your network administrator for assistance.

In this situation, you will be able to log into the RWA page without a problem; the error will not appear until you try to use RWA to connect to another machine on the network.

There are several possible causes of this problem, one of which is that a third-party Web application has been installed on the server and has enabled 32-bit application support on the DefaultAppPool application pool in IIS. To see whether this is the case, follow this procedure:

  1. Open Internet Information Services (IIS) Manager from the Administrative Tools menu.
  2. In the left pane of IIS Manager, expand the server and click Application Pools.
  3. Right-click DefaultAppPool in the center pane and select Advanced Settings.
  4. In the General section of the Advanced Settings window, check the value of Enable 32-Bit Applications.

If Enable 32-Bit Applications is set to True, this is probably the cause of the problem. Setting the value to False will likely fix it, but this will also break the third-party Web application. If the Web application can't be removed, check with the application's vendor to verify that it requires 32-bit support. If it does, see the following TechNet blog entry for instructions on getting the application to run properly: How to Run a 32bit Web Application on SBS 2008/2011 Standard.

If 32-bit application support hasn't been enabled on the default application pool, the issue may be caused by incorrect authentication settings on the RPC virtual directory. The supported authentication methods on this virtual directory should be set to Basic and Windows authentication, but Exchange may be causing it to revert to Basic authentication only. To fix the issue, perform the following steps:

  1. Run the Fix My Network wizard from the Network\Connectivity section of the SBS console.
  2. Have the wizard attempt to fix any issues it discovers, then check to see whether the problem has been resolved.
  3. If the problem persists, open the Exchange Management Shell and run the following cmdlet:
    Set-OutlookAnywhere -Identity '<servername>\Rpc (Default Web Site)' -IISAuthenticationMethods Basic,NTLM

More information on the Set-OutlookAnywhere cmdlet is available here: Set-OutlookAnywhere.




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikel-ID: SLN249178

Datum der letzten Änderung: 09/25/2014 03:40 PM


Diesen Artikel bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
Ja Nein
Schicken Sie uns Ihr Feedback.
Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\
Derzeit ist kein Zugriff auf das Feedbacksystem möglich. Bitte versuchen Sie es später erneut.

Vielen Dank für Ihr Feedback.