SLES 10 iSCSI timeout after load balancing request when using the native open-iscsi
SLES 10 iSCSI timeout after load balancing request when using the native open-iscsi
This article provides information on what to do if a SUSE Linux Enterprise Server 10 using native open-iSCSI time outs after an iSCSI load balancing request.
Modify the /etc/iscsi/iscsid.conf
To improve this situation, there are two modifications that can be made to the /etc/iscsi/iscsid.conf.
If your discovery is password protected, provide the authentication information to iscsid by adding your password information for the discovery to the end of /etc/iscsid.conf file
discovery.sendtargets.auth.authmethod = CHAP
discovery.sendtargets.auth.username = <username>
discovery.sendtargets.auth.password = <password>
Then add the following 2 new entries to give a little wiggle room with connection timeouts on load balancing activities.
node.conn[0].timeo.noop_out_interval = 10
node.conn[0].timeo.noop_out_timeout = 30
Identificación del artículo: SLN111190
Última fecha de modificación: 12/22/2014 05:11 AM
Califique este artículo
Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
Sí No
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.
Muchas gracias por sus comentarios.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"