How to Print an Envelope in the Standard Trays on the Dell 5130cn Printer - KB Article - 365132

How to Print an Envelope in the Standard Trays on the Dell 5130cn Printer - KB Article - 365132

Print an Envelope in the Standard Tray

Never use envelopes with windows, coated linings, or self-stick
adhesives. These lead to paper jams and can cause damage to the printer.
  1. Set the envelopes in the paper tray and adjust the guides.

    1. Pull the tray out of the printer (Figure 1).

      Figure 1: Removing the Paper Tray

    2. Adjust the paper guides on the back and sides to match the media that you are using (Figure 2).

      Figure 2: Adjusting the Paper Guides.

  2. Verify that the envelope switch is in envelope mode.

    1. Raise the latch on the handle of the right hand cover to open the cover.

    2. Press down the lever to set the envelope mode (Figure 3).

      Figure 3: Setting Envelope Mode

    3. Load the envelope into the tray.

      NOTE: If you insert plain paper in the MPF, lift up the lever (Figure 4).

      Figure 4: Disabling Envelope Mode

  3. Verify that the envelope is inserted with the flap closed, air vacuumed and the short edge facing toward the printer. Orient the print side facing down and slide the envelope into the entry slot.
    You can load envelopes up to the maximum fill line in the tray at one time.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID článku: SLN106774

Datum poslední změny: 07/26/2010 12:00 AM

Zhodnoťte tento článek

Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.