Invalid Engine Code Error on Dell 5210n, 5310n Printers

Invalid Engine Code Error on Dell 5210n, 5310n Printers


Article Summary: This article provides information on "Invalid Engine Code Error on Dell 5210n, 5310n Printers".


Table of Contents:
  1. Invalid Engine Code Error on Dell 5210n, 5310n Printers.


Issue 1.


Invalid Engine Code Error on Dell 5210n, 5310n Printers.


1. Turn the printer off.

2. Wait 10 seconds.

3. Turn the printer on.

4. Determine if the issue still occurs.

5. If error recurs clear the NVRAM.

To clear the Printers NVRAM:

-> Power off the printer.

-> Hold down the right arrow and Select button while powering on the printer.

-> Release the buttons when the printer's MB and MHZ appears.

-> On the LCD, CONFIG MENU appears.

-> Press the down arrow until Factory Defaults appears.

-> Press the Select button.

-> Press the Select button to choose Restore Base.

->The printer restarts.


6. Determine if the same error is still displayed.

7. If the error is still displayed please contact Dell Technical Support.

 



Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID článku: SLN133365

Datum poslední změny: 12/05/2019 02:04 PM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.