Table of Contents:
80, Scheduled, Maintenance, Advised,  Error, 5210n, 5310n Printers, printer, 5210, 5310, maint, counter, reset" />

Databáze znalostí

"80 Scheduled Maintenance Advised" Error on Dell 5210n, 5310n Printers.


Article Summary: This article provides information on "80 Scheduled Maintenance Advised Error on Dell 5210n, 5310n Printers".


Table of Contents:
  1. '80 Scheduled Maintenance Advised' Error on Dell 5210n, 5310n Printers.


Issue 1.


'80 Scheduled Maintenance Advised' Error on Dell 5210n, 5310n Printers.



This is not a hardware error, it is a scheduled reminder that the fuser and other consumable components in the printer have reached the end of their usable life.

The replacement kit required to resolve is known as the 300K kit or the Fuser Maintenance Kit.

Replacement of the fuser maintenance kit is covered under the printer warranty. The fuser maintenance kit should be purchased only if the printer warranty is expired.

If this message is displayed on the LCD Panel please call Dell Technical Support to request replacement parts with an engineer.

Once the maintenance kit has been replaced, the maintenance counter will need to be reset. This should be carried out by the engineer when the part is replaced.

If you have replaced the maintenance kit and message remains on screen please follow the instructions below to reset the counter.

-> Power off the printer.

-> Hold down the right arrow and Select button while powering on the printer.

-> Release the buttons when the printer's MB and MHZ appears.

-> On the LCD, CONFIG MENU appears.

-> Press the down arrow until Reset Maint Cnt appears and press the Select button.

-> On the LCD, Reset appears.

-> Press the Select button.

-> Power off the printer and power on.


If you have replaced the part and reset the counter and the message appears on screen please call Dell Technical Support to advise.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID článku: SLN143037

Datum poslední změny: 05/10/2013 12:00 AM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.