Why do I have a disabled connector on my Harman Kardon 695 speakers? - Technical Tip - 163246

Why do I have a disabled connector on my Harman Kardon 695 speakers? - Technical Tip - 163246




The second connector is the rear channel connector.

The HK 695 speakers have two input connectors. The green connector is the front channel connector. If your sound card has only one line out jack, the second connector will likely never be used. The second connector is the rear channel connector. The connector is covered with a black rubber cap. If your sound card has two output jacks, simply remove the black rubber cap from the black connector and plug the second jack into the black color-coded audio out jack on the sound card. For additional information on your speakers, refer to your speaker documentation.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID článku: SLN32471

Datum poslední změny: 08/01/2010 12:00 AM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.