The following article provides information about VMware ESXi 6.7 Update 3 become unresponsive when Dell OpenManage Server Administrator (OMSA) 9.3.0 is Installed.
The following symptoms may occur once a Dell server is upgraded to VMware ESXi 6.7 Update 3.
If Dell OpenManage Server Administrator (OMSA) 9.3.0
is also installed:
- Tasks failing/timing-out on the host such as vMotion, snapshots, maintenance-mode, vm-power-on
- Host disconnects from vCenter when you start one of the above tasks
- ESXi Embedded Host Client is not accessible
- esxcli commands are unresponsive.
If VMware ESXi 6.7 Update 2
is installed with OMSA 9.3.0,
the service fails to start preventing any OMSA connectivity or monitoring functionality but the ESXi client is still fully accessible.
The failing OMSA service may also affect other management providers that load under ESX's CIM Server service. This includes Dell EMC iDRAC Service Module (iSM) which will lose functionality and iDRAC status will then identify the iSM service as not running.
The following event may be noted in the main ESXi syslog:
sfcb-dcim: doLoadProvider: dlopen(/usr/lib/cim/libcmpiTunnelProvider.so) failed, dlerror: libcmpiCppImpl.so.0: cannot open shared object file: No such file or directory
Dell OpenManage Server Administrator 9.3.0 that is released before ESXi 6.7 Update 2 or Update 3 were released and is therefore unsupported
Dell EMC has since released OMSA 9.3.1 which supports ESXi 6.7 Update 3 and is available for download.
To download the latest Dell OpenManage Server Administrator vSphere Installation Bundle (VIB) according to your ESXi version and your server model.
- Navigate to https://www.dell.com/support/home?app=drivers enter your server model, or enter service tag.
- Click Drivers and Downloads Tab
- Select your Operating System
- Keyword OMSA
- Download the Dell EMC OpenManage Server Administrator vSphere Installation Bundle (VIB) for your ESXi version
If you require steps on how to install OMSA please See - HOW10613