Killer Wireless firmware update guide for Ubuntu systems

Killer Wireless firmware update guide for Ubuntu systems

There are two ways to update the drivers for Killer Wireless. The simplest method is to update the Linux Firmware package as a whole, which is outlined in the first section below.

If you only want the specific Killer Wireless driver, you can pull that from the Linux Firmware and install it as well, which has been outlined in the second section below.

Table of Contents:

  1. Linux Firmware package
  2. Killer N1535 Wireless driver

Linux Firmware Package

Linux-Firmware Update Process

  1. cd ~ && mkdir linux-firmware && cd linux-firmware
  2. wget External Link
  3. sudo dpkg -i *.deb
  4. sudo modprobe -r ath10k_pci && sudo modprobe ath10k_pci
Note: To determine the current linux-firmware package available please vist: External Link

Back to Top

Ubuntu: Killer N1535 Wireless

Killer N1535 Manual Firmware Update Process

  1. In a terminal, confirm the QCA6174 with this command (Figure 1): sudo lspci | grep –i qca6174

    Figure 1
  2. Download the latest firmware and extract the contents: External Link
  3. Or you can download the ZIP and save it with the browser at this url as shown: (Figure 2)

    Figure 2
  4. Open the "Downloads" folder, then "right click" the "" and "extract here".
  5. Confirm the contents of the extracted folder as shown. You should see the "QCA6174" folder (Figure 3).

    Figure 3
  6. Back in a terminal, type "sudo nautilus" to open a root privilege file manager (Figure 4).
    1. Sudo nautilus
    2. Click on "computer"
    3. Click on folder "lib"

    Figure 4
  7. Navigate to the QCA6174 firmware directory (Figure 5).
    1. Click on "firmware"
    2. Click to open "ath10k"
    3. Right click & "Delete" the "QCA6174" directory (we are removing everything).

    Figure 5
  8. Navigate to your other file manager window where your extracted download folder is (Figure 6):
    1. Confirm your new source file location in Downloads/auth10k-firmware
    2. Confirm your new destination file location in ../firmware/ath10k
    3. Copy & paste the QCA6174 directory with all of its contents into the destination directory as shown. The path should be: /lib/firmware/ath10k/

    Figure 6
  9. Open /lib/firmware/ath10k/QCA6174/HW3.0 and rename file: firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1 To: firmware-4.bin (Figure 7)

    Figure 7
  10. Now reboot and test your new Killer Wi-Fi firmware.

Back to Top

Artikel-ID: SLN309066

Datum der letzten Änderung: 09/14/2019 09:36 AM

Diesen Artikel bewerten

Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie an, ob der Artikel hilfreich war.
Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\
verbleibende Zeichen