How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer


Table of Contents:

  1. How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

This article provides information on "How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer"


1. How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

  1. Switch the printer off, open the front cover.
  2. Locate the duplex gate.



  3. Locate the gray fuser retention clips.



  4. Slide the fuser unit forward.

  5. Then lift to remove.

Perform the steps in reverse order to reseat or replace the fuser unit.

More info can be found in the 3130cn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



Artikelnummer: SLN284839

Sidste ændringsdato: 08/03/2015 02:04 PM


Bedøm denne artikel

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
Ja Nej
Send os feedback
Kommentarer må ikke indeholde følgende specialtegn: <>()\
Vi beklager, men feedbacksystemet er nede i øjeblikket. Prøv igen senere.

Mange tak for din feedback.