Microsoft® iSCSI Initiator Timing Out When Connected to PowerVault NX1950 - registry entry/modification.

Microsoft® iSCSI Initiator Timing Out When Connected to PowerVault NX1950 - registry entry/modification.


Article Summary: This article provides information on "Microsoft® iSCSI Initiator Timing Out When Connected to Dell PowerVault NX1950".

Table of Contents:
  1. Situation
  2. Solution
  3. Note


Issue 1.


Problem



Microsoft® iSCSI Sessions Getting Disconnected From the Target NX1950

Microsoft® Internet Small Computer System Interface (iSCSI) initiator times out when connected to a Dell PowerVault NX1950.

Microsoft® iSCSI sessions are getting disconnected from the target NX1950 under some circumstances.



Solution.


Adjust the Default Timeout Values for the Microsoft® iSCSI Initiator


This can be done manually by entering it into the registry, as follows:

Note: Please consult the following Microsoft® support links,
if you have questions about modifying the registry:
  1. http://support.microsoft.com/kb/310516
  2. http://support.microsoft.com/kb/136393

Registry changes as follows:

  1. Click Start and select Run
  2. Type Regedit on the prompt and click OK
  3. There is a tree on the left pane in registry editor, navigate through it until you get to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Disk
  4. After selecting Disk on the left pane, the right pane will get populated
  5. Double click on the TimeOutValue in the right pane
  6. In the Edit DWORD Value screen, select the Decimal radio button. The default value data should show 61
  7. Select the OK button after typing 160 instead on the Value data area
  8. Close the registry editor at this point, the changes will have been made successfully
  9. Reboot the client(s) box at this point



Note.


No Hardware Replacement


As a note to this article, no hardware is deemed necessary to be replaced with this issue. 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikelnummer: SLN163888

Sidste ændringsdato: 06/04/2013 12:00 AM


Bedøm denne artikel

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
Ja Nej
Send os feedback
Kommentarer må ikke indeholde følgende specialtegn: <>()\
Vi beklager, men feedbacksystemet er nede i øjeblikket. Prøv igen senere.

Mange tak for din feedback.