Videnbase

How to Send Faxes From a Dell™ 922 All-In-One Printer By Using the MS Fax Console Program - KB Article - 180955




Install the MS Fax Console Program

To install the MS Fax Console software:

  1. Click Start.

  2. Click the Control Panel icon to display the Control Panel window.

  3. Double-click the Add or Remove Programs icon to display the Add or Remove Programs window.

  4. Click the Add/Remove Windows Components icon on the left side of the Add or Remove Programs window.

  5. When the Windows Components Wizard window appears, click to place a check in the box next to the Fax Services listing.

  6. Click Next to display the Files Needed window.

  7. Insert the Windows XP CD into the CD-ROM drive.

  8. From the Copy files from: drop-down button, select the drive-letter that represents your CD-ROM drive.

  9. Click OK to display several installation windows that automatically open and close.

  10. When the Installation Complete window appears, click Finish.

  11. Close the Add or Remove Programs window.

  12. Click Start, click All Programs, click Accessories, click Communications, and then click Fax.

  13. Click Fax Console to display the Fax Configuration Wizard window.

  14. Click Next.

  15. Enter any appropriate information in the fields provided.

  16. Click Next.

  17. Select your data/fax modem from the drop-down button located below the Please select the fax device listing.

  18. Click to select the Enable Receive listing.

    Note:
    By selecting the Enable Receive check box, it allows you to receive faxes. However, selecting this option may cause the computer modem to answer all incoming phone calls in which you may not receive voice mail.

  1. Select Manual answer or specify the number of rings.

  2. Click Next.

  3. Enter your TSID information in the field provided.

  4. Click Next.

  5. Enter the CSID information in the field provided.

  6. Click to select Print it on

  7. If you want to print all received faxes, use the drop-down menu to the right of this field to select Dell Photo AIO Printer 922.

  8. To create an archive copy of each fax, click to select the Store a copy in a folder option.

  9. Click the Browse button to select the archive location you want.

  10. Click Next.

  11. To confirm your settings, click Finish.



Send Faxes From the 922 Using the MS Fax Console Program

To send a fax using the MS Fax Console program, perform the following steps:

  1. Verify that the printer is connected to the computer, and that the printer is on.

  2. Locate and open the document or file that is to be faxed.

  3. Click File.

  4. Click Print.

  5. From the printer list, click to select Fax.

  6. Click the Print button.

  7. Follow the on-screen instructions to send the fax.



Yderligere oplysninger om Dell-printer

Du kan sende en e-mail til eller chatte med en teknisk support-repræsentant i Dell Support for at få yderligere hjælp ud over den, der gives i denne artikel.



 
Indholdet i Quick Tips bliver offentliggjort på egen hånd af professionelle fra Dell Support, der løser problemer på daglig basis. For at opnå en hurtig offentliggørelse fremstiller Quick Tips muligvis kun delvise løsninger eller foranstaltninger, der stadig er ved at blive udarbejdet eller kræver yderligere beviser for at kunne løse et problem. Derfor er Quick Tips ikke blevet gennemset, valideret eller godkendt af Dell og skal derfor anvendes med passende varsomhed. Dell kan ikke drages til ansvar for tab, herunder, men ikke begrænset til, tab af data, tab af fortjeneste eller indtægtstab, som kunder pådrager sig ved at følge procedurer eller råd, der fremgår i Quick Tips.

Artikelnummer: SLN18234

Sidste ændringsdato: 05.04.2016 14.35


Bedøm denne artikel

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
Ja Nej
Send os feedback
Kommentarer må ikke indeholde følgende specialtegn: <>()\
Vi beklager, men feedbacksystemet er nede i øjeblikket. Prøv igen senere.

Mange tak for din feedback.