Videnbase

How to Configure SMB Scanning on the S3845cdn Dell Color Laser Printer



Setting Up Scan to Network Over SMB

NOTE The printer may ask for a login name and password. By default, the User Name is "admin" and the Password is "admin". If this does not work, the default account information has been changed.

If the Password Field is missing go to Missing Password Field.

  1. Open up a new Internet browser window.
  2. In the top address bar, type the printer’s IP address and press Enter.
    NOTE: The printer’s IP address can be found from the operator panel by going to Device, selecting About, and scroll down to the Network section.
  3. Click on Address Book on the left hand side.

    Image - English ONLY
  4. Click on the Add Contact icon at the top of the screen.

    Image - English ONLY
  5. Click on the Network (SMB) option to create a new scan location.

    Image - English ONLY
  6. Enter the corresponding information into the fields as described below.

    Image - English ONLY
    Nickname: Enter a name for this scan location. This is also the name that will appear on the printer LCD display.
    Type: Indicates whether the network address location will be an IPv4 address, IPv6 address, or the printer’s host name.
    IP Address : Port: Enter the IP address (or host name, if selected) of the destination PC where the scan is being sent. The default SMB port number is 139.
    Share: This field will be for the share name of the folder created as the destination for scans.
    Document Path: This field will typically be left blank. This field is intended to indicate that a folder inside of the Share folder should be accessed for saving the scanned document.
    Login Name: Enter the User Name of the user account on the destination PC or Server. Include the domain info if required (domain-name\user-name).
    Password/Re-enter Password: Enter the password of the user account which was entered in the Login Name field.
  7. Click OK to save the entry
Back to Top

Missing Password Field

On the left side select System. Then select Security Icon.

Select SSL/TLS

Enable Http-SSL/TLS communication.

The printer will restart and Password field will populate for SMB.

Back to Top

Printer support
More information can be found in the User Guide for your model printer, or visit our Printer Support site for additional information, troubleshooting articles and videos.

Purchase Toner and other Dell Laser Printer Supplies (select your country in the dropdown shown)

Dell Recycling

It is recommended that only Dell Branded toner, drums, transfer rollers or other consumables are used in our laser printers. Dell cannot guarantee compatibility or the print quality of any 3rd party consumables.




Artikelnummer: SLN304371

Sidste ændringsdato: 08/02/2018 10:14 AM


Bedøm denne artikel

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
Ja Nej
Send os feedback
Kommentarer må ikke indeholde følgende specialtegn: <>()\
Vi beklager, men feedbacksystemet er nede i øjeblikket. Prøv igen senere.

Mange tak for din feedback.