This article discusses a "No Boot Device Available" Error seen on start-up or a No boot issue after a motherboard replacement. System may ask for the AMT settings to be entered.
The information below applies to Dell desktop systems for Poweredge servers please see article Dell PowerEdge: "No Boot Device Available" is displayed during startup.
System may exhibit the symptoms shown below :
On most occasions one of the systems above is seen after the system's Motherboard has been replaced.
Follow these steps:
Press <Alt> + <F> after the Dell Logo appears.
Once the Manufacturing Mode screen appears just follow the onscreen instructions to proceed.
If it prompts for you to enter a number for the Management settings (Intel AMT) go to the link below for further instructions
To ensure the Manufacturing Mode has been reset, please shutdown the system and turn it on again to check it boots up
Article ID: SLN143041
Last Date Modified: 10/03/2017 04:34 AM
Thank you for your feedback.