VCF on VxRail Multirack Deployment using BGP EVPN: Creating a management domain with NSX-V (part 1 of 2)

VCF on VxRail Multirack Deployment using BGP EVPN: Creating a management domain with NSX-V (part 1 of 2)



Published June 2019


This document provides step-by-step deployment instructions for Dell EMC OS10 L2 VXLAN tunnel using BGP EVPN. This guide provides the foundation for multirack VxRail host discovery and deployment. Also, the VMware Cloud Foundation (VCF) is deployed and provides a VMware NSX environment to enable a Software Defined Data Center (SDDC).

This is part 1 of 2 on deploying a SDDC in a multirack environment. A deployment guide on creating a VCF on VxRail Workload Domain (WLD) can be found at VCF on VxRail Multirack Deployment using BGP EVPN: Adding a Virtual Infrastructure workload domain with NSX-T (2 of 2) .


Download


For more related Networking Guides click here to return to our main page





Article ID: SLN317467

Last Date Modified: 08/01/2019 03:27 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.