Consulta de temas

What do the LED indicators represent on the Dell™ PowerConnect™ 2016 switch? - Technical Tip - 162123


Reading the Lights on the PowerConnectTM 2016

This article is designed to explain what the lights on the Dell PowerConnect 2016 switch indicate.

Figure 1 is a snapshot of the LED panel from the PowerConnect 2016 switch.


Figure 1

Power LED

  • Off - The unit is off.
  • Green - The unit is on and ready for operation.

100M LED

  • Off - The port is operating at 10 Mbps.
  • Green - The port is operating at 100 Mbps.

Link/Activity (LNK/ACT) LED

  • Green - A link is established.
  • Blinking Green - Data is being received or transmitted on this port.
  • Off - No link is established.

Full Duplex (FDX) LED

  • Green - The port is operating at full-duplex mode.
  • Off - No link established or the port is operating at half-duplex mode.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID del artículo: SLN49114

Última fecha de modificación: 11/14/2010 12:00 AM


Valorar este artículo

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
No
Envíenos sus comentarios
Los comentarios no pueden contener caracteres especiales: <>()\
Lo sentimos. El sistema de envío de comentarios no está operativo en estos momentos. Vuelva a intentarlo más tarde.

Gracias por sus comentarios