016-794 Network Not Ready Error on the LCD Panel [ Dell™ 3110cn, 3115cn Printer ]

016-794 Network Not Ready Error on the LCD Panel [ Dell™ 3110cn, 3115cn Printer ]


  1. Cycle power on the Printer.
    1. Turn the printer off.
    2. Wait 10 seconds.
    3. Turn the printer on.
    4. Determine if the issue still occurs.

  2. Ping the Printer.
    You would need the Printer IP Address in order to ping the printer from the computer. If possible use command prompt - ping command.

  3. Determine if the printer is connected (ping was successful).
    • The printer is not connected to the network: Research for " Printer Communication Failure ".
    • Ping was OK:
      1. Verify the address book is set correctly.
        1. When the printer is Ready (Copy, Scan, Fax appears in the LCD), press the Down button until Fax is indicated,
          then press the Select button.
        2. Press the Down button until Phone Book is indicated, then press the Select button.
        3. Locate the number that is being dialed, and verify that it is correct.


      2. If the same problem still persists, Contact Technical Support.
 


ID del artículo: SLN101530

Última fecha de modificación: 11/02/2010 12:00 AM


Valorar este artículo

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
No
Envíenos sus comentarios
Los comentarios no pueden contener caracteres especiales: <>()\
Lo sentimos. El sistema de envío de comentarios no está operativo en estos momentos. Vuelva a intentarlo más tarde.

Gracias por sus comentarios