A guide to Miracast on the Latitude 13 7350 Tablet PC

A guide to Miracast on the Latitude 13 7350 Tablet PC



The following article provides information about Miracast, to check for the feature on the Latitude 13 7350 system and how to configure it if possible.


Table of Contents:

  1. What is Miracast?
  2. Is my system Miracast capable?
  3. Setting up Miracast on your Dell Tablet

1. What is Miracast?

Miracast is a peer-to-peer, wireless screencast standard formed by a Wi-Fi direct connection similar to Bluetooth or WiDi that Microsoft is supporting under Windows 8.1.

Miracast enables wireless delivery of compressed standard or high-definition audio and video to or from desktops, tablets, mobile phones, and other devices.

The Miracast receiver used must be Wi-Fi Certified for the technology to work.


Back to Top


2. Is my system Miracast capable?

Minimum requirements to support Miracast:

  • Windows 8.1
  • Wi-Fi receiver must be Wi-Fi Certified
  • Windows Display Driver Model (WDDM) 1.3 Graphics drivers
  • WIFI driver must be Network Driver Interface Specification (NDIS) 6.3 or newer

To check if your system is Miracast-capable

Go to The Dell Support Site and select your system, select Windows 8.1 as your operating system (OS), then update all your Dell drivers to the latest Windows 8.1 versions available. Once all drivers updated, continue to the next section below.

To check if your Network driver is Miracast-capable

  1. Swipe in from the right edge of the display to access Charms.

  2. Type CMD in the search box and select Command Prompt.

  3. Type powershell and press the Enter key to get into powershell mode. You will see the following prompt: PS C:\Users\Dell_000

  4. Type the next command: Get-netadapter|select Name, ndisversion

  5. The results that should display will have a line entry for each type of network adapter in the system - Wireless, Bluetooth and Ethernet and each line with end with the NDIS version.

If the results show that the NDIS version is not 6.3 or greater, the system is not Miracast-capable.

To check if the graphics drivers are Miracast-capable

  1. Swipe in from the right edge of the display to access Charms.

  2. Type dxdiag into the search box and press the Enter key.

  3. When the DirectX Diagnostic ToolPage opens, select the Display tab - or the next page button near the bottom of the window. You will see the Driver Model at the bottom of the right hand column.

If the driver model does not state WDDM 1.3, your system is not Miracast-capable and you cannot continue.


Back to Top


3. Setting up Miracast on your Dell Tablet

Connect the Miracast receiver to your display or TV by following the manufacturer’s installation instructions.

Once the Miracast adapter is properly connected, you should see a message on the display or TV that the device is ready.

  1. Swipe in from the right edge of the display to access Charms.

  2. Select Devices and the Devices menu will slide out from the right side of the screen.

  3. Now select Project and the Project menu will appear with the Miracast device displayed. If you do not see the adapter listed as a selection, you will need to select Add a wireless display option at the bottom of the list and your system will automatically detect your device.

  4. Once you can see your Miracast device, you can select it and let your system and device be paired for use. Your local display will then be broadcast to your external display.


Back to Top





Artikkelin tunnus: SLN294439

Muokattu viimeksi: 03/14/2018 02:20 PM


Arvostele tämä artikkeli

Tarkka
Hyödyllinen
Helppo hahmottaa
Oliko tästä artikkelista hyötyä?
Kyllä Ei
Lähetä meille palautetta
Kommenteissa ei voi olla seuraavia erikoismerkkejä: <>()\
Pahoittelumme, palautejärjestelmä ei ole nyt käytettävissä. Yritä myöhemmin uudelleen.

Kiitos palautteestasi.