Display Windows Move/Resize After Resuming From Sleep State

Display Windows Move/Resize After Resuming From Sleep State


Dell 4K Ultra HD monitor refresh rate issue

You may experience a problem with your Dell 4K Ultra HD monitor, connected via the DisplayPort connection, where any open windows get resized and moved to the upper-left corner of the monitor after resuming from a sleep state. The issue has been identified with the following Dell monitor types: UP3214Q, P2715Q,P2415Q with the maximum resolution set to 3840 x 2160 and a refresh rate of 60 Hertz. In addition, non-Dell 4K Ultra HD monitors with these specific settings and connection type experience an identical problem.

Change monitor refresh rate

To resolve this issue, change the monitor setting refresh rate from 60 Hertz to 30 Hertz.

For monitors like the P2415Q (and most 4K displays), it’s not possible to change the Refresh Rate from within Windows settings. The refresh rates are set by the setting in the MONITOR On-Screen Display (OSD) menu:

The OSD Menu should have options for either Multi-Stream Transport (MST) or DisplayPort 1.2 (DP1.2)

Setting MST options:

  • Off = 60Hz for 4K displays
  • Primary = Reserved for Daisy Chain setup (30Hz for 4K displays)
  • Secondary = Reserved for Daisy Chain setup (30Hz for 4K displays)

Setting DP1.2 Options

  • DP1.2 option set to Disabled: --> DP 1.1 = 30Hz for 4K displays
  • DP1.2 option set to Enabled: --> DP 1.2 = 60Hz For 4k displays




ID de l'article : SLN295708

Date de la dernière modification : 09/14/2019 03:51 PM


Noter cet article

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
Oui Non
Envoyez-nous vos commentaires
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\
Désolé, notre système de collecte des commentaires est actuellement indisponible. Veuillez réessayer ultérieurement.

Merci pour vos commentaires.