Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Article Number: 000139515


Interpreting LCD and Embedded Diagnostic (ePSA) event messages

Summary: The server LCD presents an error message, or an error message is generated when running the Enhanced Pre-Boot System Assessment (ePSA)

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Symptoms

The server LCD presents an error message, or an error message is generated when running the Enhanced Pre-Boot System Assessment (ePSA).

Resolution

Refer to:  Dell Event Message Reference (Event and Error Message Reference Guide for 14th Generation Dell EMC PowerEdge Servers)

The Event Message Reference contains the error and event information generated by firmware and other agents that monitor system components.  These events might be logged, presented to the user on one of the system management consoles, or both logged and displayed.

Additional Information:

To run the Embedded System Diagnostics (also known as Enhanced Pre-Boot System Assessment).
  1. As the system boots, press <F11>.
  2. Use the up and down arrows keys to select System Utilities -> Launch Dell Diagnostics

Article Properties


Affected Product

Servers, PowerEdge

Last Published Date

21 Feb 2021

Version

3

Article Type

Solution