Knowledge Base

Upgrading to Windows 10 on Precision Desktops Fail Without PERC Drivers

This article provides information on "Upgrading to Windows 10 on Precision Desktops Fail Without PERC Drivers".

Perc Drivers

If you are trying to upgrade from Windows 7 / 8.1 to Windows 10 using the GWX tool from Microsoft on a Precision Desktop but are having recovery messages or other "storage device not available" related issues. You will need to inject the proper Intel Rapid Storage for Enterprise drivers while running the upgrade.

Example command to run Windows 10 upgrade with needed drivers:

  • Intel Rapid Storage for Enterprise.
  • MSI Driver (PERC)
  • Open Command prompt as Admin:
    Type the following command:
  • C:\W10\W10ISO\setup.exe /auto Upgrade /InstallDrivers C:\W10\W10PECAB /DynamicUpdate Enable /ImageIndex 1

Article ID: SLN300758

Last Date Modified: 12/12/2016 12:37 PM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.