Consulta de temas

How to Troubleshoot Exit Jam (Exit Sensor Off JAM) on a S2810dn Dell Laser Printer

This article provides information on "How to Troubleshoot Exit Jam (Exit Sensor Off JAM) on a S2810dn Dell Laser Printer"

Troubleshoot Exit Jam (Exit Sensor Off JAM)

Step Action Yes No
1 Ensure the fusing unit is installed correctly.
Does this solve your problem?
The task is complete. Go to action 2.
2 Replace the fusing unit, the transfer unit, and the retard roller.
  1. See "Replacing the Fusing Unit, the Transfer Unit, and the Retard Roller."
  2. After you replace the fusing unit, Launch the Tool Box.
  3. Click Chart Print on the Diagnosis tab.
  4. Click Pitch Configuration Chart.
    The Pitch Configuration Chart is printed.
The task is complete. Please contact Dell Technical Support.

If these steps do not correct the problem, please contact Dell Technical Support.

Printer support
More information can be found in the User Guide for your model printer, or visit our Printer Support site for additional information, troubleshooting articles and videos.

Purchase Toner and other Dell Laser Printer Supplies (select your country in the dropdown shown)

Dell Recycling

It is recommended that only Dell Branded toner, drums, transfer rollers or other consumables are used in our laser printers. Dell cannot guarantee compatibility or the print quality of any 3rd party consumables.

Back to Top

Identificación del artículo: SLN298569

Última fecha de modificación: 08/03/2018 11:36 AM

Califique este artículo

Fácil de comprender
¿Este artículo fue útil?
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.