Número del artículo: 000138210
Issue:
Battery shown in state failed by monitoring software. OpenManage Server Administrator CLI shows battery state = failed / battery status = critical. RAID controller log of PERC H700 shows several of the following lines:
Solution:
I2C messages in the controller log refer to internal communication (to iDRAC for example) on the SMbus. These messages can be ignored.
Additional Information:
I2C 1 reset
I2C 1 cannot find idle bus!
I2C b PID 1 TIMEOUT!
I2C 1 reset
I2C messages in the controller log refer to internal communication (to iDRAC for example) on the SMbus. These messages can be ignored.
Servers, PowerEdge
21 feb 2021
3
Solution