My Computer Doesn´t Start After Changing the Active Partition Using the Disk Management Tool in Microsoft® Windows® XP. - KB Article - 123824

My Computer Doesn´t Start After Changing the Active Partition Using the Disk Management Tool in Microsoft® Windows® XP. - KB Article - 123824


How to Create an MS-DOS® Boot Diskette

  1. Click on the file name below to download a boot disk creation program:

    Diagft32.exe

    The File Download window will appear.

  2. Choose to Save this program to disk if it is not already selected and click on the OK button to continue.
    出现“Save As(另存为)”窗口。

  3. Choose a location for the file and click Save.

注 注: Common locations for internet downloads will be: My Documents, Downloads, or the Desktop.

  1. When the file download is complete, find the file in its new location and double click the file to begin creating a boot disk.

  1. A gray ZIG-ZAG Hard Disk Recovery window will open.单击“Start(开始)”按钮。

  2. A black window will appear, advising you that you will need a blank, formatted diskette.按键盘上的 ENTER键。

  3. Place a diskette into drive A: and press the <Enter> key again.

  4. You will be advised that the disk in Drive A is about to be overwritten.To continue, press the <Y> key on your keyboard, followed by the <Enter> key once more.

  5. When the new boot disk is complete, you will be asked to press the <Enter> key for the last time.This will exit out of the command prompt window as well as the ZIG-ZAG Hard Disk Recovery program.



Manually Change the Active Partition

  1. 将软盘插入软驱。

  2. Start the computer.
    The computer boots to a command prompt.

  3. At the C:\> prompt, type the following text:
    fdisk

  4. 按<Enter>键。
    You are prompted to Enable large disk support.

  5. 单击“Yes(是)”按钮。

  6. Click Set active partition.

  7. Type the number of the partition that you want to make active.

  8. 按<Enter>键。

  9. 按<Esc>键。

  10. Remove the boot disk, and restart your computer.



使用“Recovery Console(故障恢复控制台)”

Refer to the Dell Knowledge Base article below to boot to the recovery console.

“How do I use the Microsoft® Windows® XP Recovery Console?(如何使用Microsoft® Windows® XP恢复控制台?)”

  1. C:\>提示符后面键入以下命令:
    cd

  2. 按<Enter>键。

  3. Type the letter of your CD-ROM drive at the C:\> prompt.

  4. 按<Enter>键。

  5. 在 C:\>提示符后面键入以下命令:
    cd i386

  6. Type the following text at the x:\i386\> prompt, where x is the letter of your CD-ROM drive:
    Copy ntldr c:

  7. 按<Enter>键。

  8. Type Exit and press <Enter> to exit the recovery console.

  9. Reboot your system.



访问戴尔社区论坛了解更多信息

访问“Dell Community Forums(戴尔社区论坛)”查看戴尔用户社区中的其他用户讲了哪些内容。戴尔社区论坛为戴尔用户提供了一个讨论支持主题、学习和互助的场所。使用留言板发布问题和答案。



 


“快速提示”内容由日常解决问题的戴尔支持专业人员自行发布。 为了快速发布,“快速提示”可能仅体现部分解决方案或仍处于开发过程中或有待进一步验证是否可成功解决问题的解决办法。 因此,“快速提示”尚未经过戴尔的审阅、验证或批准,应谨慎使用。戴尔对客户因遵循“快速提示”中所述的任何流程或建议而可能导致的任何损失,包括但不限于数据丢失、利润或收入损失概不负责。

文章 ID: SLN130370

上次修改日期: 2010/12/10 00:00


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
評語中不得包含下列特殊字元:<>()\
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您的寶貴意見。