Using a Dell™ A960 All-In-One Printer Without Using the Computer - KB Article - 175139

Using a Dell™ A960 All-In-One Printer Without Using the Computer - KB Article - 175139




Overview: Set up the A960 All-In-One Printer for Stand-Alone Faxing

Note:
This document pertains to the ability to utilize stand-alone faxing to send or receive faxes.
Stand-alone faxing allows you to send and receive faxes without the need to have your computer turned on or running.



Stand-Alone Faxing for DSL Users

Note:
DSL delivers digital data to a computer through a telephone line; the Dell A960 All-In-One printer is designed to work with analog data.
If you are faxing over a telephone line connected to a DSL Modem, it is recommended that you install a DSL filter to avoid interference with the analog fax modem signal.

  1. Connect the DSL filter to an active telephone line.

Connect the DSL Filter for A960 Stand-Alone Faxing
Figure 1: Connect the DSL Filter for A960 Stand-Alone Faxing

  1. Connect the printer directly to the output of the DSL filter with a telephone (RJ-11) cable.

Note:
Do not install any splitters between the DSL filter and the printer.

Note:
Integrated Services Digital Network (ISDN) and cable modems are not fax modems and are not supported for faxing.



A960 Stand-Alone Faxing for Non-DSL Users

To prevent your A960 All-In-One printer from malfunctioning when sending or receiving stand-alone faxes, verify that the telephone connections to your A960 are connected as indicated below:

Connections for Non-DSL Stand-Alone Faxing With the A960 All-In-One
Figure 1: Connections for Non-DSL Stand-Alone Faxing With the A960 All-In-One



Use the Stand-Alone Feature to Send Faxes

Note:
This document pertains to the ability to utilize stand-alone faxing to send or receive faxes.
Stand-alone faxing allows you to send and receive faxes without the need to have your computer turned on or running.

To send faxes using the stand-alone feature on the A960, perform the following steps:

  1. Verify that the printer is on.

  2. Verify that an active telephone line is connected to the wall jack connector on the printer.

Note:

For information on locating the wall jack connector, refer to Dell Knowledge Base Article:

"How Do I Connect the Phone Line Cabling To the Back of My Dell™ A960 All-In-One Printer?" Article ID: 171842

  1. Load the document to be faxed onto the scanner glass or into the Automatic Document Feeder (ADF).

Note:

For additional information on using the Automatic Document Feeder (ADF) feature, refer to Dell Knowledge Base Article:

"How Do I Use the Automatic Document Feeder (ADF) On the Dell™ A960 All-In-One Printer?" Article ID: 172647

  1. Press the Fax button located on the Operator Panel.

Note:

For a description of each of the buttons located on the operator panel, refer to Dell Knowledge Base Article:

"What Is the Function Of Each Of the Buttons On the Operator Panel Of My Dell™ A960 All-In-One Printer?" Article ID: 171814

  1. Use the keypad to perform the following actions:

    • Enter the fax number
      or
    • Press Speed Dial, and then:

      • Press the + or - buttons to scroll through the list to find the number you want
        or
      • Enter a two-digit number (viewable in the upper left of the LCD display).

  2. Press the Black or Color button on the operator panel.

Note:
If you are faxing a document that has only text on it, press the Black button; otherwise, press the Color button on the Operator Panel to send documents that have color text and/or images.

    The printer scans the document and begins the transmission.

Note:
In order to send a color fax, the machine to which you are sending the fax must also support color faxes.



Use the Stand-Alone Feature on the A960 All-In-One to Receive Faxes

Note:
This document pertains to the ability to utilize stand-alone faxing to send or receive faxes.
Stand-alone faxing allows you to send and receive faxes without the need to have your computer turned on or running.

To receive a fax using the stand-alone feature, perform the following steps:

  1. Verify that the printer is On.

  2. Verify that an active telephone line is connected to the wall jack connector on the printer.

Note:

For information on locating the wall jack connector on your Dell A960 All-In-One printer, refer to Dell Knowledge Base Article:

"How Do I Connect the Phone Line Cabling To the Back of My Dell™ A960 All-In-One Printer?" Article ID: 171842

  1. Press the Fax button on the operator panel.

Note:

For a description of each of the buttons located on the operator panel of the Dell™ A960 All-In-One printer, refer to Dell Knowledge Base Article:

"What Is the Function Of Each Of the Buttons On the Operator Panel Of My Dell™ A960 All-In-One Printer?" Article ID: 171814

  1. Press the Options button until Answer Fax appears on the LCD display.

  2. Press the + button to scroll through the available options and select After 1 ring, After 2 rings, After 3 rings, or After 5 rings.

  3. Press the Select button.

    When the number of set rings is detected, the printer will automatically receive the fax transmission.



Dell™打印机其它信息

有关本文中所提供帮助以外的更多帮助,您可以通过向戴尔支持的技术支持代表发送电子邮件或与其交谈



 
“快速提示”内容由日常解决问题的戴尔支持专业人员自行发布。 为了快速发布,“快速提示”可能仅体现部分解决方案或仍处于开发过程中或有待进一步验证是否可成功解决问题的解决办法。 因此,“快速提示”尚未经过戴尔的审阅、验证或批准,应谨慎使用。戴尔对客户因遵循“快速提示”中所述的任何流程或建议而可能导致的任何损失,包括但不限于数据丢失、利润或收入损失概不负责。

文章 ID: SLN51385

上次修改日期: 2010/12/10 00:00


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
評語中不得包含下列特殊字元:<>()\
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您的寶貴意見。