Setting Up the P2415Q / P2715Q Monitors with HDMI 2.0 that Support 4K x 2K 60Hz


Setting Up the P2415Q / P2715Q Monitors with HDMI 2.0 that Support 4K x 2K 60Hz



Summary: "Dell P2415Q and P2715Q displays purchased after February 2016 (Version A03) have HDMI 2.0 capability but HDMI 1.4 is enabled by default."


HDMI 2.0 Capability Not Enabled by Default

High Definition Multimedia Interface (HDMI) version 2.0 provides the user with 4k x 2k resolution capability @60 hz for Dell P2415Q and P2715Q flat panel displays. This HDMI 2.0 capability is only available on the P2415Q and P2715Q displays sold after February 2016 (Version A03). The HDMI 2.0 option is not enabled from the factory.

Dell P2415Q and P2715Q displays purchased before March 2016 (Versions A00, A01, A02), only support HDMI 1.4 and provide 4k x 2k (3840 x 2160 pixels) resolution @ 30 Hz using the HDMI cable connection. 4k x 2k @60 Hz is available via DisplayPort connection on these displays.


How to Enable HDMI 2.0 on the Version A03 Displays

You can enable HDMI 2.0 in your P2415Q, or P2715Q flat panel displays purchased after February 2016 (Version A03) using the following steps:

  1. Unplug all video cables from the display. (Leave only the power connected to the display.)
  2. Power on the display.
  3. Select the HDMI (MHL) input option. (A floating dialogue box will appear.)
  4. Press and hold the button that is associated with the Green check mark for 6 to 8 seconds (Figure 1).
    Dell P2415Q and P2715Q Monitor Input Setting
    Figure 1
  5. A dialogue box appear that states HDMI 1.4 Enable or Disable (Figure 2).
    DEll P2415Q On Screen Menu Display
    Figure 2
  6. Select the option to Disable HDMI 1.4 support and press the button next to the green check mark to confirm the selection.
  7. Reconnect the video cables to the display.
NOTE: Performing a Factory Reset of the display in the Onscreen Display (OSD) menu. Open the OSD menu by pressing the button above the power button. Then press the arrow down to select Other, and then arrow down to and select Factory Reset. This will revert the display back to HDMI 1.4 and this change to HDMI 2.0 will need to be repeated.

Additional Information

Dell P2715Q/P2415Q User's Guide (in English)






Article ID: SLN306595

Last Date Modified: 07/22/2020 05:16 PM

Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\
characters left.