Article Summary: USC May Not List NIC Daughtercards in a Blade Server's Mezzanine PCI Slot
|Article Summary:||This article describes that ethernet NIC daughtercards in blade servers may be listed as installed in a PCI Slot X when configured with USC.|
Confusion When Installing More Than One Daughtercard
Ethernet NIC daughtercards in blade servers may be listed as installed in a PCI Slot X when configuring with Unified Server Configuration (USC). Instead, the location should be listed as a mezzanine slot letter. This may be confusing when installing more than one daughtercard of the same type.
System Is Functioning Normally
The system is functioning normally. Mezzanine PCI slots are labeled A and B on half-height blade servers and A - D on full-height blade servers. USC may instead list the location as Slot 1 which corresponds to MEZZ A.
Article ID: SLN85655
Last Date Modified: 02/23/2016 03:00 PM
Thank you for your feedback.