Network, hardware, and software requirements need to be addressed prior to installing Dell Encryption Enterprise Self-Encrypting Drive Manager (formerly Dell Data Protection | Self-Encrypting Drive Manager).
Affected Products:
Dell Encryption Enterprise Self-Encrypting Drive Manager
Dell Data Protection | Self-Encrypting Drive Manager
Affected Versions:
v8.0.0 and Later
Network Requirements
Dell Encryption Enterprise Self-Encrypting Drive Manager requires:
- Endpoint to be hard-wired during product installation/activation
- Network connectivity to the Dell Security Management Server (formerly Dell Data Protection Server) for authentication
Note:
- By default, Dell Security Management Server uses ports:
- 8443 for activation
- 8888 for authentication
- IPV6 is not supported
If Dell Encryption Enterprise uses On-the-Box (OTB) entitlements (licenses), then cloud.dell.com over port 443 must be whitelisted.
Click on either Hardware or Software for additional product requirements.
Minimum hardware requirements:
- Intel Pentium or AMD Processor
- 110 MB of free disk space
- 512MB RAM
Additional hardware requirements vary based on:
- Pre-Boot Authentication (PBA) Options
- Self-Encrypting Drive (SED) Compatibility
Click on the appropriate option for more information.
Warning:
- Unlisted drive models are not supported.
- Multiple drive configurations are not supported.
- Any NVME drive that is being leveraged as a SED:
- Must have BIOS SATA operation set to RAID ON.
- Must have BIOS boot mode set to Unified Extensible Firmware Interface (UEFI) with Legacy option ROMs disabled.
- Any non-NVME drive that is being leveraged as a SED:
- Must have BIOS SATA operation set to AHCI.
- For more information on switching BIOS SATA operation, reference How to Switch from ACHI to RAID on Dell Data Security Window Systems.
- Dell systems using a Zoom card to manage SEDs may require additional configuration. For more information, reference Required Configuration for Self-Encrypting Drives When Using a Zoom Card.
SED compatibility can be determined by Product Version or SED Manufacturer. Click on the appropriate product version. For more information on product versioning, reference How to Identify the Version of Dell Encryption Enterprise Self-Encrypting Drive Manager.
Click on the appropriate SED manufacturer for a list of specific supported drive models.
- PRO2500
- PRO2500R
- SSDSCKGF240A5
- CV3 series
- L9M series
- M3 series
- M6 series
- V2G series
- V2M series
- M500
- M550
- M600
- RealSSD C400
- 1100
- 1300
- PM961
- PM850 EVO
- PM851
- PM871
- PM871A
- PM951
- PM961
- PM981
- PM981A
- SM840 EVO MZ-MTEXXXBW
- SM841
- SM841N
- Barracuda
- Barracuda Pro
- ST250L7009
- ST320LT009
- ST320LT014
- ST500LM001
- ST500LM015
- ST500LM020
- ST500LM021
- ST500LM023
- ST500LM024
- ST500LT012
- ST500LT015
- ST500LT025
- ST500LT033
- MKxx61GSYD series
- MKxx61GSYG series
- THNSF5
- XG4
- XG5
- XG6
Dell Encryption Enterprise Self-Encrypting Drive Manager supports Unified Extensible Firmware Interface (UEFI) and Legacy Boot Mode PBA on select:
- Authentication Options
- Computer Models
- Docking Stations
Click on the appropriate option for more information.
Note:
- When using UEFI Boot Mode, it is recommended to enable UEFI Networking Stack within BIOS.
- Windows 7 does not support UEFI Boot Mode.
Authentication options vary by product version. Click on the appropriate product version. For more information on product versioning, reference How to Identify the Version of Dell Encryption Enterprise Self-Encrypting Drive Manager.
- Password1
- Smart Cards
- Oberthur ID-One COSMO v7.0
- Gemalto IDCore 3020 (TOP DL v2)
- Java Card PIV
- Gemalto IDPrime PIV Card2.0
- Gemalto TOP DL GX4 144K
- Smart Card Readers
- IOGEAR GSR212
- SIIG USB 2.0
- Dell Smart Card Keyboard KB-813
1Active Directory option User Must Change Password at Next Logon is not supported within PBA.
- Password1
- Smart Cards
- Oberthur ID-One COSMO v7.0
- Gemalto IDCore 3020 (TOP DL v2)
- Java Card PIV
- Gemalto IDPrime PIV Card2.0
- Gemalto TOP DL GX4 144K
1Active Directory option User Must Change Password at Next Logon is not supported within PBA.
- Password1
- Smart Cards
- CSP Cards
- PKSC11 Smart Cards using the ActivIdentity client
- Common Access Cards (CAC)
1Active Directory option User Must Change Password at Next Logon is not supported within PBA.
2The ActivIdentity client must be installed separately.
Note:
- Dell ControlVault must be installed for PBA functionality.
- UEFI Boot Mode is not supported untill v8.6.1.
- Password1
- Smart Cards
- CSP Cards
- PKSC11 Smart Cards using the ActivIdentity client
- Common Access Cards (CAC)
1Active Directory option User Must Change Password at Next Logon is not supported within PBA.
2The ActivIdentity client must be installed separately.
Note:
- Dell ControlVault must be installed for PBA functionality.
- UEFI Boot Mode is not supported untill v8.6.1.
Click on either Dell or Non-Dell for a list of supported computer models.
UEFI Boot mode are validated on specific Dell model series:
- Latitude
- Precision
- XPS
- OptiPlex
- Venue
Click on the appropriate model series for more information.
Note:
- UEFI Boot mode is only supported on endpoints running Windows 8, Windows 8.1, or Windows 10
- Unlisted Dell models running Windows 7, Windows 8, Windows 8.1, and Windows 10 support Legacy Boot mode.
- Latitude 3180
- Latitude 3189
- Latitude 3190
- Latitude 3300
- Latitude 3380
- Latitude 3389
- Latitude 3390 2-in-1
- Latitude 3480
- Latitude 3490
- Latitude 3541
- Latitude 3580
- Latitude 3590
- Latitude 5280
- Latitude 5290
- Latitude 5300
- Latitude 5400
- Latitude 5405
- Latitude 5420 Rugged
- Latitude 5480
- Latitude 5490
- Latitude 5491
- Latitude 5495
- Latitude 5500
- Latitude 5501
- Latitude 5580
- Latitude 5591
- Latitude 7200 2-in-1
- Latitude 7285
- Latitude 7290
- Latitude 7300
- Latitude 7370
- Latitude 7380
- Latitude 7390
- Latitude 7389 2-in-1
- Latitude 7400
- Latitude 7424 Rugged Extreme
- Latitude 7490
- Latitude E5250
- Latitude E5270
- Latitude E5285
- Latitude E5289 2-in-1
- Latitude E5450
- Latitude E5470
- Latitude E5550
- Latitude E5570
- Latitude E6440
- Latitude E6540
- Latitude E7240
- Latitude E7250
- Latitude E7270
- Latitude E7280
- Latitude E7350
- Latitude E7389 2-in-1
- Latitude E7440
- Latitude E7450
- Latitude E7470
- Latitude E7480
- Latitude 12 Rugged Extreme (model 7414)
- Latitude 12 Rugged Tablet (model 7202)
- Latitude 7212 Rugged Extreme Tablet
- Latitude 14 Rugged Extreme (model 7414)
- Latitude 14 Rugged (model 5414)
- Precision 3430 Small Form Factor
- Precision 3510
- Precision 3520
- Precision 3531
- Precision 3630
- Precision 3930 Rack
- Precision 4800
- Precision 5510
- Precision 5520
- Precision 5530
- Precision 5540
- Precision 5720 All-in-One
- Precision 5820T
- Precision 6800
- Precision 7520fa
- Precision 7530
- Precision 7540
- Precision 7710
- Precision 7720
- Precision 7730
- Precision 7740
- Precision 7820T
- Precision 7920T
- Precision D5720 All-In-One
- Precision R7920
- Precision T1700
- Precision T3420
- Precision T3620
- Precision T5810
- Precision T7810
- Precision T7910
- XPS 13 9333
- XPS 13 9350
- XPS 13 9360
- XPS 13 9361
- XPS 13 9365
- XPS 13 9370
- XPS 13 9380
- XPS 15 7590
- XPS 15 9550
- XPS 15 9560
- XPS 15 9570
- XPS 15 9575
- Optiplex 3040 Micro, Mini Tower, Small Form Factor
- Optiplex 3046
- Optiplex 3050 All-In-One
- Optiplex 3050 Tower, Small Form Factor, Micro
- Optiplex 3060 Tower, Small Form Factor, Micro
- Optiplex 3070 Micro, Mini Tower, Small Form Factor
- Optiplex 5040 Mini Tower, Small Form Factor
- Optiplex 5050 Tower, Small Form Factor, Micro
- Optiplex 5070 Micro, Mini Tower, Small Form Factor
- Optiplex 7020
- Optiplex 7040 Micro, Mini Tower, Small Form Factor
- Optiplex 7050 Tower, Small Form Factor, Micro
- Optiplex 7060 Micro, Mini Tower, Small Form Factor
- Optiplex 3240 All-In-One
- Optiplex 5055
- Optiplex 5250 All-in-One
- Optiplex 5260 All-In-One
- Optiplex 5270 All-In-One
- Optiplex 5820 Tower
- Optiplex 7010
- Optiplex 7070 Micro, Mini Tower, Small Form Factor
- Optiplex 7440 All-In-One
- Optiplex 7450 All-In-One
- Optiplex 7460 All-In-One
- Optiplex 7740 All-In-One
- Optiplex 7820 Tower
- Optiplex 7920 Rack
- Optiplex 9010
- Optiplex 9020 Micro, Mini Tower, Small Form Factor
- Optiplex 9020 All-In-One
- Optiplex 9030 All-In-One
- Optiplex XE2
- Optiplex XE3
- Venue Pro 11 (Model 5175)
- Venue Pro 11 (Model 5179)
- Venue Pro 11 (Model 7139)
Warning: Unlisted Non-Dell models are not supported with either UEFI or Legacy Boot Mode.
UEFI Boot mode are supported on:
- HP Elitebook 840 G3
- HP EliteBook 1040 G3
- HP Probook 840 G4
- Lenovo ThinkPad P50
- Lenovo ThinkPad T560
Note: UEFI Boot mode is only supported on endpoints running Windows 8, Windows 8.1, or Windows 10.
Legacy Boot Mode are supported on:
- HP ProBook 450 G2
- HP ProBook 450 G5
- HP Elitebook 840 G3
- HP Probook 840 G4
- HP EliteBook 1040 G3
- Lenovo ThinkPad T560
Note: Legacy Boot Mode is supported only on endpoints running Windows 7, Windows 8, Windows 8.1, and Windows 10.
Warning: Unlisted docking stations are not supported with either UEFI or Legacy Boot Mode.
Click on the appropriate product version for a list of supported docking stations. For more information on product versioning reference, How to Identify the Version of Dell Encryption Enterprise Self-Encrypting Drive Manager.
UEFI and Legacy Boot Mode support:
- Trinity DS,BME,TB16
- Trinity DS,IE,WD15
- Wildcat Legacy Adapter (LD17)
- DA200 USC-C to HDMI/VGA/Ethernet/USB 3.0 Adapter
- Dell Thunderbolt TB161
1Dell Thunderbolt docks may experience delays connecting to external devices. For more information, reference Thunderbolt Dock (TB16 or TB18DC) 10 to 15 Second Delay Initializing Connected Devices.
Legacy Boot Mode support only:
- Dell USB 3.0 Ultra HD Triple Video Docking Station D3100
- Dell D1000 Dual Video USB 3.0 Docking Station
- Dell Dock with Monitor Stand (DS1000)
- Dell Type C/USB-A Dock (D6000)
UEFI and Legacy Boot Mode support:
- Trinity DS,BME,TB16
- Trinity DS,IE,WD15
- Wildcat Legacy Adapter (LD17)
- DA200 USC-C to HDMI/VGA/Ethernet/USB 3.0 Adapter
Legacy Boot Mode support only:
- Dell USB 3.0 Ultra HD Triple Video Docking Station D3100
- Dell D1000 Dual Video USB 3.0 Docking Station
- Dell Dock with Monitor Stand (DS1000)
- Dell Type C/USB-A Dock (D6000)
Click on the appropriate product version for specific software requirements. For more information on product versioning, reference How to Identify the Version of Dell Encryption Enterprise Self-Encrypting Drive Manager.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 7 SP1 Enterprise, Professional, Ultimate3
1Supports versions 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1).
1Version 1511 (November Update / Threshold 2) is not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2017 Redistributable Package (x86 or x64) or later.
Note: Microsoft Visual C++ 2017 Redistributable Package is automatically installed when installing Dell Encryption Enterprise Self-Encrypting Dive Manager through the installation wizard.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 7 SP1 Enterprise, Professional, Ultimate3
1Supports versions 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), and 1809 (October 2018 Update / Redstone 5).
1Versions 1511 (November Update / Threshold 2) and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2015 Update 3 Redistributable Package (x86/x64)
Note: Microsoft Visual C++ 2015 Update 3 Redistributable Package is automatically installed when installing Dell Encryption Enterprise Self-Encrypting Dive Manager through the installation wizard.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8 Enterprise, Pro2
- Microsoft Windows 7 SP1 Enterprise, Professional, Ultimate3
1Supports versions 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), and 1809 (October 2018 Update / Redstone 5).
1Versions 1511 (November Update / Threshold 2), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2015 Update 3 Redistributable Package (x86/x64)
Note: Microsoft Visual C++ 2015 Update 3 Redistributable Package is automatically installed when installing Dell Encryption Enterprise Self-Encrypting Dive Manager through the installation wizard.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Update 0-1, Enterprise, Pro2
- Microsoft Windows 7 SP1 Enterprise, Professional, Ultimate3
1Supports versions 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), and 1809 (October 2018 Update / Redstone 5).
1Versions 1511 (November Update / Threshold 2), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2015 Update 3 Redistributable Package (x86/x64)
Note: Microsoft Visual C++ 2015 Update 3 Redistributable Package is automatically installed when installing Dell Encryption Enterprise Self-Encrypting Dive Manager through the installation wizard.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Update 0-1, Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Supports versions 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), and 1809 (October 2018 Update / Redstone 5).
1Versions 1511 (November Update / Threshold 2), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2015 Update 3 Redistributable Package (x86/x64)
Note: Microsoft Visual C++ 2015 Update 3 Redistributable Package is automatically installed when installing Dell Encryption Enterprise Self-Encrypting Dive Manager through the installation wizard.
Note:
- Dell ControlVault must be installed prior to Dell Encryption Enterprise Self-Encrypting Drive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Update 0-1, Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Supports versions 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3).
1Versions 1511 (November Update / Threshold 2), , 1803 (April 2018 Update / Redstone 4), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2015 Update 3 Redistributable Package (x86/x64)
Note: Microsoft Visual C++ 2015 Update 3 Redistributable Package is automatically installed when installing Dell Encryption Enterprise Self-Encrypting Dive Manager through the installation wizard.
Note:
- Dell ControlVault must be installed prior to Dell Encryption Enterprise Self-Encrypting Drive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Update 0-1, Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Supports versions 1511, (November Update / Threshold 2), 1607 (Anniversary Update / Redstone), and 1703 (Creators Update / Redstone 2).
1Versions 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2015 Update 3 Redistributable Package (x86/x64)
Note: Microsoft Visual C++ 2015 Update 3 Redistributable Package is automatically installed when installing Dell Encryption Enterprise Self-Encrypting Dive Manager through the installation wizard.
Note:
- Dell ControlVault must be installed prior to Dell Encryption Enterprise Self-Encrypting Drive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Update 0-1, Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Supports versions 1511, (November Update / Threshold 2), 1607 (Anniversary Update / Redstone), and 1703 (Creators Update / Redstone 2).
1Versions 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), and 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86/x64)
- Microsoft Visual C++ 2012 Update 4 Redistributable Package (x86/x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 4 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- Microsoft .NET Framework Version 4.5.2 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Drive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Supports versions 1511, (November Update / Threshold 2) and 1607 (Anniversary Update / Redstone).
1Versions 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
- Microsoft Visual C++ 2012 Update 4 Redistributable Package (x86and x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 4 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- Microsoft .NET Framework Version 4.5.2 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Supports versions 1511, (November Update / Threshold 2) and 1607 (Anniversary Update / Redstone).
1Versions 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
- Microsoft Visual C++ 2012 Update 4 Redistributable Package (x86 and x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 4 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- Microsoft .NET Framework Version 4.5.2 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Supports version 1511, (November Update / Threshold 2).
1Versions 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), and 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
- Microsoft Visual C++ 2012 Update 4 Redistributable Package (x86 and x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 4 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- Microsoft .NET Framework Version 4.5.2 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Supports version 1511, (November Update / Threshold 2).
1Versions 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), and 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
- Microsoft Visual C++ 2012 Update 4 Redistributable Package (x86 and x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 4 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- The full version of Microsoft .NET Framework Version 4.0 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Versions 1511 (November Update / Threshold 2), 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
- Microsoft Visual C++ 2012 Update 4 Redistributable Package (x86 and x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 4 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- The full version of Microsoft .NET Framework Version 4.0 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 10 Education, Enterprise, Pro12
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 8.1 Enterprise, Pro2
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate3
1Versions 1511 (November Update / Threshold 2), 1607 (Anniversary Update / Redstone), 1703 (Creators Update / Redstone 2), 1709 (Fall Creators Update / Redstone 3), 1803 (April 2018 Update / Redstone 4), 1809 (October 2018 Update / Redstone 5), and 1903 (May 2019 Update / 19H1) are not supported.
2UEFI boot mode supported.
3The Encryption Client is not supported within Windows XP Mode.
3NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
- Microsoft Visual C++ 2012 Update 3 Redistributable Package (x86 and x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 3 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- The full version of Microsoft .NET Framework Version 4.0 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 8.1 Enterprise, Pro
- Microsoft Windows 8.1 Enterprise, Pro
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate1
1The Encryption Client is not supported within Windows XP Mode.
1NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
- Microsoft Visual C++ 2012 Update 3 Redistributable Package (x86 and x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 4 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- The full version of Microsoft .NET Framework Version 4.0 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate1
1The Encryption Client is not supported within Windows XP Mode.
1NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
- Microsoft Visual C++ 2012 Update 3 Redistributable Package (x86 and x64)
Note: Microsoft Visual C++ 2010 SP1 and Microsoft Visual C++ 2012 Update 4 (x86 and x64) are automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- The full version of Microsoft .NET Framework Version 4.0 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
Operating Systems:
- Microsoft Windows 7 SP0-SP1 Enterprise, Professional, Ultimate1
1The Encryption Client is not supported within Windows XP Mode.
1NVME SEDs are not supported with Windows 7.
Application Requirements:
- Microsoft Visual C++ 2010 SP1 Redistributable Package (x86 and x64)
Note: Microsoft Visual C++ 2010 SP1 (x86 and x64) is automatically installed when installing Dell Data Protection | Self-Encrypting Dive Manager through the installation wizard.
- The full version of Microsoft .NET Framework Version 4.0 or later
Note:
- Dell ControlVault must be installed prior to Dell Data Protection | Self-Encrypting Dive Manager.
- The latest version of Dell ControlVault can be downloaded from https://www.dell.com/support.
For support, US-based customers may contact Dell Data Security ProSupport at 877.459.7304, Option 1, Ext. 4310039, or via the Chat Portal. To contact support outside the US, reference ProSupport’s International Contact Numbers. For additional insights and resources, visit the Dell Security Community Forum.