How to Send Faxes From a Dell 922 All-In-One Printer By Using the MS Fax Console Program - KB Article - 180955

How to Send Faxes From a Dell 922 All-In-One Printer By Using the MS Fax Console Program - KB Article - 180955

Install the MS Fax Console Program

To install the MS Fax Console software:

  1. Click Start.

  2. Click the Control Panel icon to display the Control Panel window.

  3. Double-click the Add or Remove Programs icon to display the Add or Remove Programs window.

  4. Click the Add/Remove Windows Components icon on the left side of the Add or Remove Programs window.

  5. When the Windows Components Wizard window appears, click to place a check in the box next to the Fax Services listing.

  6. Click Next to display the Files Needed window.

  7. Insert the Windows XP CD into the CD-ROM drive.

  8. From the Copy files from: drop-down button, select the drive-letter that represents your CD-ROM drive.

  9. Click OK to display several installation windows that automatically open and close.

  10. When the Installation Complete window appears, click Finish.

  11. Close the Add or Remove Programs window.

  12. Click Start, click All Programs, click Accessories, click Communications, and then click Fax.

  13. Click Fax Console to display the Fax Configuration Wizard window.

  14. Click Next.

  15. Enter any appropriate information in the fields provided.

  16. Click Next.

  17. Select your data/fax modem from the drop-down button located below the Please select the fax device listing.

  18. Click to select the Enable Receive listing.

    By selecting the Enable Receive check box, it allows you to receive faxes. However, selecting this option may cause the computer modem to answer all incoming phone calls in which you may not receive voice mail.

  1. Select Manual answer or specify the number of rings.

  2. Click Next.

  3. Enter your TSID information in the field provided.

  4. Click Next.

  5. Enter the CSID information in the field provided.

  6. Click to select Print it on

  7. If you want to print all received faxes, use the drop-down menu to the right of this field to select Dell Photo AIO Printer 922.

  8. To create an archive copy of each fax, click to select the Store a copy in a folder option.

  9. Click the Browse button to select the archive location you want.

  10. Click Next.

  11. To confirm your settings, click Finish.

Send Faxes From the 922 Using the MS Fax Console Program

To send a fax using the MS Fax Console program, perform the following steps:

  1. Verify that the printer is connected to the computer, and that the printer is on.

  2. Locate and open the document or file that is to be faxed.

  3. Click File.

  4. Click Print.

  5. From the printer list, click to select Fax.

  6. Click the Print button.

  7. Follow the on-screen instructions to send the fax.

Dell Printer Additional Information

For additional assistance beyond what is provided in this article, you can E-mail or Chat with a Technical Support Representative at Dell support.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN18234

Last Date Modified: 08/25/2010 12:00 AM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.