OptiPlex 9010 Removal Guide Index for Customer Replaceable Parts (CRU)

OptiPlex 9010 Removal Guide Index for Customer Replaceable Parts (CRU)



This article provides information on how to safely remove the customer replaceable units (CRUs) in the various Dell Optiplex 9010


Table of Contents:

  1. Removal Guide Contents
  2. The Mini Tower (MT) Chassis
  3. The Desktop (DT) Chassis
  4. The Small Form Factor (SFF) Chassis
  5. The Ultra Small Form Factor (USFF) Chassis

1. Removal Guide Contents

These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of the Various Dell Optiplex 9010 systems. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace).

The guides will also include pictures to reference what's involved.

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.


Back to Top


2. The Mini Tower (MT) Chassis

Back to Top


3. The Desktop (DT) Chassis

Back to Top


3. The Small Form Factor (SFF) Chassis



Back to Top

4. The Ultra Small Form Factor (SFF) Chassis



Back to Top

If you require further assistance, please contact Technical Support




ID articolo: SLN298119

Data ultima modifica: 08/10/2017 10:22 AM


Valuta questo articolo

Preciso
Utile
Facile da comprendere
Questo articolo ti è stato d'aiuto?
No
Inviaci un feedback
I commenti non possono contenere i seguenti caratteri speciali: <>() \
Spiacenti, il sistema di feedback al momento non è attivo. Riprova più tardi.

Grazie per il tuo feedback.