Knowledge Base

How do I change the parallel port mode on my Dell Dimension 8200 computer to the printer manufacturers preferred setting? - Technical Tip - 146189




Set this preferred parallel port mode in the system BIOS on the Dimension™ 8200

Refer to your manual to find the preferred parallel port mode for your device. To set this preferred parallel port mode in your system BIOS, perform the following steps:

  1. Close any open programs.

  2. Restart the computer.

  3. When the blue Dell logo screen appears, press the <F2> key to enter the BIOS (System Setup) program.

    NOTE: If you wait too long to press the <F2> key, allow the operating system to finish loading. Restart the computer and then press the <F2> key when the lights on your keyboard flash.

  4. The BIOS screen appears. Press the <Down Arrow> key to highlight Integrated Devices (LegacySelect Options).

  5. Press the <Enter> key. The Integrated Devices submenu appears.

  6. Press the <Down Arrow> key to highlight Parallel Port.

  7. Press the <Enter> key. The Parallel Port submenu appears.

  8. Press the <Left Arrow> or <Right Arrow> key to change Mode to the preferred setting for your device. If you are unsure of your specific device''s settings, refer to your device manual or contact the device manufacturer for the recommended setting.

  9. Once the preferred mode is set, press the <Esc> key three (3) times to clear the two submenus and close the BIOS screen.

  10. Select Save Changes and Exit using the <Up Arrow> or <Down Arrow> key, then press the <Enter> key. The machine will reboot.


The available options are AT, PS/2 (default), EPP, and ECP. For additional information on what these settings are, click here.


The Parallel Port Printer Modes That Are Available in the BIOS (System Setup)

If you are connecting a printer or scanner to your system using the parallel port, you must set the proper parallel port mode for your device within your system BIOS. The various parallel port printer modes are Output only (AT), Bi-directional (PS/2), Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP). If you are unsure of your specific device's settings, refer to your device manual or contact the device manufacturer for the recommended setting.

NOTE: If you need technical assistance for your printer, call the printer's manufacturer (see the documentation that came with the printer for the correct phone number). Dell does not provide support for third-party software and peripherals. Support for all third-party software and peripherals is provided by the original manufacturer of the product.

For more information on the Dell Software and Peripheral Support Policy, refer to the following link:

http://accessories.us.dell.com/sna/siteinfo.aspx?c=us&cs=19&l=en&s=dhs&~topic=techsupport




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID articolo: SLN83078

Data ultima modifica: 07/27/2015 09:25 AM


Valuta questo articolo

Preciso
Utile
Facile da comprendere
Questo articolo ti è stato d'aiuto?
No
Inviaci un feedback
I commenti non possono contenere i seguenti caratteri speciali: <>() \
Spiacenti, il sistema di feedback al momento non è attivo. Riprova più tardi.

Grazie per il tuo feedback.