How to Remove and Install the Separator Roller on the B5460dn / B5465dnf / S5830dn Dell Laser Printer

How to Remove and Install the Separator Roller on the B5460dn / B5465dnf / S5830dn Dell Laser Printer


Table of Contents:

  1. How to Remove and Install the Separator Roller for the 550 Sheet Paper Tray on the B5460dn / B5465dnf / S5830dn Dell Laser Printer
  2. How to Remove and Install the Separator Roller for the 2100 Sheet Paper Tray on the B5460dn / B5465dnf / S5830dn Dell Laser Printer

This article provides information on "How to Remove and Install the Separator Roller on the B5460dn / B5465dnf / S5830dn Dell Laser Printer"


1. How to Remove and Install the Separator Roller for the 550 Sheet Paper Tray on the B5460dn / B5465dnf / S5830dn Dell Laser Printer

Replacing the Separator Roller on Dell B5460dn and B5465dnf Laser Printers (1:22) - English Only

  1. Remove the paper tray from the printer.

  2. To remove the separator roller from the paper tray, press and hold the blue button on the left of the tray. Then lift the roller on the left side.

  3. Remove the replacement separator roller from the packaging.

  4. Locate the mounting holes to the left of the tray. Insert the replacement roller into the holes.

  5. Then press down on the left while holding the blue button to the left of the tray.



  6. Insert the paper tray back into the printer.

  7. Insert used roller into the replacement roller package and send off for recycling.

For recycling information click on "Dell Recycling".

More info can be found in the B5460dn User’s Guide or the B5465dnf User’s Guide.

Back to Top

2. How to Remove and Install the Separator Roller for the 2100 Sheet Paper Tray on the B5460dn / B5465dnf / S5830dn Dell Laser Printer

  1. Remove the paper tray from the printer.

  2. To remove the separator roller from the paper tray, press and hold the blue button on the left of the tray. Then lift the roller on the left side.

  3. Remove the replacement separator roller from the packaging.

  4. Locate the mounting holes to the left of the tray. Insert the replacement roller into the holes.

  5. Then press down on the left while holding the blue button to the left of the tray.



  6. Insert the paper tray back into the printer.

  7. Insert used roller into the replacement roller package and send off for recycling.

For recycling information click on "Dell Recycling".

More info can be found in the B5460dn User’s Guide or the B5465dnf User’s Guide or the S5830dn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



記事ID: SLN291247

最終更新日: 01/10/2018 05:26 PM


この記事を評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
はい いいえ
フィードバックをお寄せください
コメントでは、以下の特殊文字は利用できません: <>()\
申し訳ありませんが、フィードバックのシステムは現在ご利用いただけません。後でもう一度試してください。

フィードバックをありがとうございます。