Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

How to Troubleshoot 900 Firmware / Blue Screen Errors on Dell Laser Printers

Summary: Troubleshooting and resolving 900 Firmware or Blue Screen Errors on Dell Laser Printers.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Symptoms


Follow the guidance provided in this article to troubleshoot 900 firmware or blue screen errors you may see on your Dell Laser Printer.


Table of Contents

  1. Explanation of Errors
  2. Restart the Printer with the Data Connections Removed
  3. Clear the Print Queues
  4. Reinstall the Driver
  5. Change the Printer’s IP Address
  6. Update the Printer’s Firmware
  7. Reset the Printer’s NVRAM
  8. Steps for Printing Corrupt Jobs

Explanation of Errors

900 firmware errors are most commonly caused by an issue with the information which is sent to the printer and rarely indicate a hardware related issue.

When corrupt data causes one of these errors to occur, isolating the printer from the print job, driver, system, or network can help determine the source of the corrupt information.

Back to Top

Restart the Printer with the Data Connections Removed

  1. Turn the printer off.
  2. Disconnect the printer from any data cables (Ethernet, USB, Parallel, and Fax) or wireless networks.
  3. With the data connections removed, turn the printer on.
  4. If the printer completes the Power On Self-Test (POST) with no errors, print a settings report from the operator panel menus.
  5. If the settings report prints successfully, the issue is unlikely to be hardware related and troubleshooting should be continued at section 3 - Clearing the Print Queues.
  6. If the settings report results in a 900 firmware error, restart the printer, perform an NVRAM reset for your printer using the information in section 7 - Reset the Printer’s NVRAM, and attempt to print the settings report again.
  7. If the settings report results in a 900 firmware error after the NVRAM reset, please contact Dell Technical Support.
Back to Top

Clear the Print Queues

  1. Clear all jobs from the print queues on all systems which can print to this printer using the steps in the article Clearing the Print Spooler in Windows.
  2. Reinsert the data cable and restart the printer.
  3. Wait for about one minute for the printer to reestablish network communication.
  4. If the error occurs before sending a new print job to the printer, continue to section 5 - Change the Printer’s IP Address.
  5. 5. If the error does not return after reconnecting the network connection, print a Windows test page from one of your systems. Should the error occur after printing the test page, this can indicate a corrupt driver. Clear this print job and restart the printer. If a Windows test page from a different system does not generate an error, continue with Section 4 - Reinstall the Driver on the system which causes the error.
  6. 6. If the error does not occur when printing test pages, attempt to reprint the original job which was queued when the error occurred. If the error returns, this can indicate an issue with a specific job and troubleshooting should continue with Section 6 - Update the Printer’s Firmware.
Back to Top

Reinstall the Driver

  1. Completely uninstall the driver and other printer software on the system from which the error occurs when printing. After uninstalling the driver and printer software, restart the system or the print spooler service.
  2. Download and install the latest version of the printer’s driver from Dell's Support Website: Drivers & downloads.
  3. After reinstallation of the driver, attempt to print a Windows test page again.
  4. If the error occurs, clear the job, restart the printer, and attempt to print a Windows test page with a driver other than the one which is currently being used.
  5. If the error occurs with a Windows test page after reinstallation or with multiple drivers on one system, the print spooler on this system may be corrupt. Troubleshooting should continue with Section 6 Update the Printer’s Firmware prior to contacting Dell Technical Support.
Back to Top

Change the Printer’s IP Address

If the printer generates a 900 firmware error when connected to a data connection while there are no print jobs in any of the print queues, there may be a source on the network which is sending corrupt data which the printer cannot interpret. Follow the steps below to change the printer's IP address to troubleshoot this issue:

  1. Turn the printer off.
  2. Disconnect the printer from any data cables (Ethernet, USB, Parallel, and Fax) or wireless networks.
  3. With the data connections removed, turn the printer on.
  4. In the printer’s menus on the operator panel, change the printer’s IP address to a static address which is different from the previous IP address and is not currently assigned to another device on the network.
  5. Reconnect the printer to the data connection and verify that the error does not return.
  6. If the error does not return after reconnecting to the network, resume troubleshooting at section 3 - Clearing the Print Queues.
Back to Top

Update the Printer’s Firmware

  1. After clearing all print queues and restarting the printer without an error, download and install the latest version of the printer’s firmware from Dell's Support Website: Drivers & downloads.
  2. Attempt to reprint your documents after the update.
  3. If errors return after updating the firmware, continue to Section 7 - Reset the Printer’s NVRAM.
Back to Top

Reset the Printer’s NVRAM

Occasionally, printers can retain jobs in their memory (Non-Volatile RAM) when attempting to reprint them. This can cause the unit to reboot with an error when attempting to reprint a corrupt job.

In order to clear the memory of the printer to remove all jobs in the memory, perform the NVRAM reset steps for your printer using the steps for your model from the links below:

Back to Top

Steps for Printing Corrupt Jobs

Occasionally, corrupt print jobs can result from corrupt or incompatible data inside of a specific document.

If there is a specific font type in the document causing data corruption issues, the setting to print TrueType Fonts as Bitmaps can be enabled in the driver preferences to attempt to overcome the font issue following the steps below:

  1. Click Preferences in the printer properties screen (Figure 1):

    SLN133381_en_US__1Printer properties screen
    Figure 1: Click Preferences in the printer properties screen

  2. Change the setting for True Type Fonts to print as Bitmaps (Figure 2):

    SLN133381_en_US__2True type font bitmap
    Figure 2: Change the True Type Font setting to Bitmap

Alternatively, if a specific document or application generates a 900 firmware error, attempt to save the document as a different file type or print it from another application. If the errors continue with a specific document after performing the above steps, the document may need to be recreated.

Back to Top
SLN133381_en_US__3Printer Support
More information can be found in the User Guide for your model printer, or visit our Printer Support site for additional information, troubleshooting articles and videos.  

Purchase Toner and other Dell Laser Printer Supplies

Dell Recycling
 
SLN133381_en_US__4icon It is recommended that only Dell Branded toner, drums, transfer rollers or other consumables are used in our laser printers. Dell cannot guarantee compatibility or the print quality of any 3rd party consumables.

Article Properties


Affected Product
Dell 1700/n Mono Laser Printer, Dell 1710/n Mono Laser Printer, Dell 1720/dn Mono Laser Printer, Dell 2230d/dn Mono Laser Printer, Dell 2330d/dn Mono Laser Printer, Dell 2335dn Multifunctional Laser Printer, Dell 2350d/dn Mono Laser Printer , Dell 3333/3335dn Mono Laser Printer, Dell 5230n/dn Mono Laser Printer, Dell 5310n Mono Laser Printer, Dell 5350dn Mono Laser Printer, Dell 5530/dn Mono Laser Printer, Dell 5535dn Mono Laser MFP, Dell B2360d Mono Laser Printer, Dell B2360dn Mono Laser Printer, Dell B3460dn Mono Laser Printer, Dell B3465dn Mono Laser Multifunction Printer, Dell B3465dnf Mono Laser Multifunction Printer, Dell B5460dn Mono Laser Printer, Dell B5465dnf Mono Laser Printer MFP ...
Last Published Date

21 Feb 2021

Version

4

Article Type

Solution